T Series
T Series chains have greater shock load resistance and higher ultimate tensile strength than comparable ASME/ANSI standard roller chains. This is accomplished by using thru hardened pins. The dimensions of the chains are identical to ASME/ANSI standard roller chains.
T Series chains have greater shock load resistance and higher ultimate tensile strength than comparable ASME/ANSI standard roller chains. This is accomplished by using thru hardened pins. The dimensions of the chains are identical to ASME/ANSI standard roller chains.
Item # |
ANSI No. |
Standard Type of Pin |
Strand |
P - Pitch |
R - Roller Diameter |
W - Width Between Roller Link Plates |
|---|---|---|---|---|---|---|
| RS60T | ANSI No. N/A 60 | Standard Type of Pin N/A Cottered or Riveted | Strand N/A Single | P - Pitch N/A 0.750 in | R - Roller Diameter N/A 0.469 in | W - Width Between Roller Link Plates N/A 0.500 in |
| RS80T | ANSI No. N/A 80 | Standard Type of Pin N/A Cottered or Riveted | Strand N/A Single | P - Pitch N/A 1.000 in | R - Roller Diameter N/A 0.625 in | W - Width Between Roller Link Plates N/A 0.625 in |
| RS100T | ANSI No. N/A 100 | Standard Type of Pin N/A Cottered or Riveted | Strand N/A Single | P - Pitch N/A 1.250 in | R - Roller Diameter N/A 0.750 in | W - Width Between Roller Link Plates N/A 0.750 in |
| RS120T | ANSI No. N/A 120 | Standard Type of Pin N/A Cottered or Riveted | Strand N/A Single | P - Pitch N/A 1.500 in | R - Roller Diameter N/A 0.875 in | W - Width Between Roller Link Plates N/A 1.000 in |
| RS140T | ANSI No. N/A 140 | Standard Type of Pin N/A Cottered or Riveted | Strand N/A Single | P - Pitch N/A 1.750 in | R - Roller Diameter N/A 1.000 in | W - Width Between Roller Link Plates N/A 1.000 in |
| RS160T | ANSI No. N/A 160 | Standard Type of Pin N/A Cottered or Riveted | Strand N/A Single | P - Pitch N/A 2.000 in | R - Roller Diameter N/A 1.125 in | W - Width Between Roller Link Plates N/A 1.250 in |
| RS200T | ANSI No. N/A 200 | Standard Type of Pin N/A Cottered or Riveted | Strand N/A Single | P - Pitch N/A 2.500 in | R - Roller Diameter N/A 1.562 in | W - Width Between Roller Link Plates N/A 1.500 in |
| RS240T | ANSI No. N/A 240 | Standard Type of Pin N/A Cottered or Riveted | Strand N/A Single | P - Pitch N/A 3.000 in | R - Roller Diameter N/A 1.875 in | W - Width Between Roller Link Plates N/A 1.875 in |
| RS60T-2 | ANSI No. N/A 60 | Standard Type of Pin N/A Cottered or Riveted | Strand N/A Double | P - Pitch N/A 0.750 in | R - Roller Diameter N/A 0.469 in | W - Width Between Roller Link Plates N/A 0.500 in |
| RS80T-2 | ANSI No. N/A 80 | Standard Type of Pin N/A Cottered or Riveted | Strand N/A Double | P - Pitch N/A 1.000 in | R - Roller Diameter N/A 0.625 in | W - Width Between Roller Link Plates N/A 0.625 in |
| RS100T-2 | ANSI No. N/A 100 | Standard Type of Pin N/A Cottered or Riveted | Strand N/A Double | P - Pitch N/A 1.250 in | R - Roller Diameter N/A 0.750 in | W - Width Between Roller Link Plates N/A 0.750 in |
| RS120T-2 | ANSI No. N/A 120 | Standard Type of Pin N/A Cottered or Riveted | Strand N/A Double | P - Pitch N/A 1.500 in | R - Roller Diameter N/A 0.875 in | W - Width Between Roller Link Plates N/A 1.000 in |
| RS140T-2 | ANSI No. N/A 140 | Standard Type of Pin N/A Cottered or Riveted | Strand N/A Double | P - Pitch N/A 1.750 in | R - Roller Diameter N/A 1.000 in | W - Width Between Roller Link Plates N/A 1.000 in |
| RS160T-2 | ANSI No. N/A 160 | Standard Type of Pin N/A Cottered or Riveted | Strand N/A Double | P - Pitch N/A 2.000 in | R - Roller Diameter N/A 1.125 in | W - Width Between Roller Link Plates N/A 1.250 in |
| RS200T-2 | ANSI No. N/A 200 | Standard Type of Pin N/A Cottered or Riveted | Strand N/A Double | P - Pitch N/A 2.500 in | R - Roller Diameter N/A 1.562 in | W - Width Between Roller Link Plates N/A 1.500 in |
| RS240T-2 | ANSI No. N/A 240 | Standard Type of Pin N/A Cottered or Riveted | Strand N/A Double | P - Pitch N/A 3.000 in | R - Roller Diameter N/A 1.875 in | W - Width Between Roller Link Plates N/A 1.875 in |
| RS60T-3 | ANSI No. N/A 60 | Standard Type of Pin N/A Cottered or Riveted | Strand N/A Triple | P - Pitch N/A 0.750 in | R - Roller Diameter N/A 0.469 in | W - Width Between Roller Link Plates N/A 0.500 in |
| RS80T-3 | ANSI No. N/A 80 | Standard Type of Pin N/A Cottered or Riveted | Strand N/A Triple | P - Pitch N/A 1.000 in | R - Roller Diameter N/A 0.625 in | W - Width Between Roller Link Plates N/A 0.625 in |
| RS100T-3 | ANSI No. N/A 100 | Standard Type of Pin N/A Cottered or Riveted | Strand N/A Triple | P - Pitch N/A 1.250 in | R - Roller Diameter N/A 0.750 in | W - Width Between Roller Link Plates N/A 0.750 in |
| RS120T-3 | ANSI No. N/A 120 | Standard Type of Pin N/A Cottered or Riveted | Strand N/A Triple | P - Pitch N/A 1.500 in | R - Roller Diameter N/A 0.875 in | W - Width Between Roller Link Plates N/A 1.000 in |
| RS140T-3 | ANSI No. N/A 140 | Standard Type of Pin N/A Cottered or Riveted | Strand N/A Triple | P - Pitch N/A 1.750 in | R - Roller Diameter N/A 1.000 in | W - Width Between Roller Link Plates N/A 1.000 in |
| RS160T-3 | ANSI No. N/A 160 | Standard Type of Pin N/A Cottered or Riveted | Strand N/A Triple | P - Pitch N/A 2.000 in | R - Roller Diameter N/A 1.125 in | W - Width Between Roller Link Plates N/A 1.250 in |
| RS200T-3 | ANSI No. N/A 200 | Standard Type of Pin N/A Cottered or Riveted | Strand N/A Triple | P - Pitch N/A 2.500 in | R - Roller Diameter N/A 1.562 in | W - Width Between Roller Link Plates N/A 1.500 in |
| RS240T-3 | ANSI No. N/A 240 | Standard Type of Pin N/A Cottered or Riveted | Strand N/A Triple | P - Pitch N/A 3.000 in | R - Roller Diameter N/A 1.875 in | W - Width Between Roller Link Plates N/A 1.875 in |
Follow Us On:
U.S. Tsubaki Automotive LLC
Conveyor Operations