Para enviar suas informações para a Tsubaki, pressione este botão
TFS Series Cam Clutch is a sprag type clutch designed for press fit installation. Sprag type designs typically have a higher torque capacity than a similarly sized ramp & roller type clutch. TFS has two vertical keyways on the outer race to assist with locating. Outside dimensions are the same as Series 63 ball bearings. This design is ideal for general inner or outer race overrunning applications. Since the TFS Series does not include an integral bearing, installing the TFS Cam Clutch next to a bearing which handles both the axial and radial loads is the typical application.
Unidade de medida

Especificações

Código UPC

N/A 097039883629

Tamanho do orifício

N/A 1.378 pol.35.00 mm

Capacidade de torque

N/A 350.3 lb·pé475.0 N·m

Avanço máximo do anel interno

N/A 1400 rpm

Avanço máximo do anel externo

N/A 700 rpm

Torque de arrasto

N/A 0.310 lb·pé0.42 N·m

Rasgo de chaveta

N/A 10 x 2,4 mm

A (Largura total)

N/A 1.220 pol.31.00 mm

B (Diâmetro total)

N/A 3.150 pol.80.00 mm

C (DI do anel externo)

N/A 2.756 pol.70.00 mm

D (DI do anel interno)

N/A 1.890 pol.48.00 mm

E (Chanfro)

N/A 0.071 pol.1.80 mm

F (Chanfro)

N/A 0.039 pol.1.00 mm

G (Largura da ranhura)

N/A 0.472 pol.12.00 mm

H (Profundidade da ranhura)

N/A 0.138 pol.0.14 mm

Peso

N/A 1.738 lb0.790 kg