Para enviar suas informações para a Tsubaki, pressione este botão
Tsubaki’s One-Touch Inspection Doors® are dust and moisture tight and designed specifically for industrial conveyor enclosures and material processing/handling equipment. These unique, patented, lockable, pre-fabricated units are simple to install and allow for quick and easy access without any special tools. No loose parts or bolts to misplace.
ONE-TOUCH INSPECTION DOORS 3-PART DESIGN
REGULAR
This is the regular style of One-Touch Inspection Door, which provides stable quality.
</>
HIGH NECK (H)
High-neck style has a higher frame than the regular style. Suitable for installation on curved surfaces, areas using heat insulating materials and areas which need the frame high.
</>
COMMON INDUSTRIES
GENERAL MANUFACTURING
INDUSTRIAL MINERALS
MINING
CEMENT
GRAIN
POWER GENERATORS
FERTILIZER
EASY ACCESS IN 3 EASY STEPS
1. POSITION THE DOOR
Place the door frame at the appropriate site and tack weld it into position. Then solidly weld the frame to the surface.
</>
2. CUT THE INSIDE HOLE
Open the door and carefully torch burn the center to create the access point.
</>
3. COMPLETE INSTALLATION
After the area has cooled, attach the lever, apply the gasket, and place the safety warning label in a prominent position.
</>
Tsubaki One-Touch Inspection Doors:
KEY SAFETY FEATURES:
</>
ONE-TOUCH INSPECTION DOORS 3-PART DESIGN
- The framework is made of high quality mild steel or stainless steel to ensure durability and long service life.
- The strong, long-lasting hinges and self-locking handles open and close easily.
- The specially designed gaskets withstand temperatures of -95ºF to 550ºF and ensure a tight fit against water and dust.
- Installs quickly to existing equipment without detailed dimensioning or costly structural changes.
- Lockable, pre-fabricated units are simple to install and allow for quick and easy access without any special tools.
- Custom Made-To-Order sizes and configurations are available upon request.
REGULAR
This is the regular style of One-Touch Inspection Door, which provides stable quality.
</>
HIGH NECK (H)
High-neck style has a higher frame than the regular style. Suitable for installation on curved surfaces, areas using heat insulating materials and areas which need the frame high.
</>
COMMON INDUSTRIES
GENERAL MANUFACTURING
INDUSTRIAL MINERALS
MINING
CEMENT
GRAIN
POWER GENERATORS
FERTILIZER
EASY ACCESS IN 3 EASY STEPS
1. POSITION THE DOOR
Place the door frame at the appropriate site and tack weld it into position. Then solidly weld the frame to the surface.
</>
2. CUT THE INSIDE HOLE
Open the door and carefully torch burn the center to create the access point.
</>
3. COMPLETE INSTALLATION
After the area has cooled, attach the lever, apply the gasket, and place the safety warning label in a prominent position.
</>
Tsubaki One-Touch Inspection Doors:
- Durable and trouble-free
- Dust and rain tight
- Easy to open
- Easy to install
KEY SAFETY FEATURES:
- Lockout Ability - A simple padlock can be used on any door to prevent entry to equipment.
- Protective Screen - A protective screen for visual inspection is available for immediate shipment on P1, P2 and P3 styles*. Meets OSHA standards. (*Special order for other styles)
</>
Unidade de medida
Especificações
Espessura da estrutura |
N/A bitola 10 |
Espessura da tampa |
N/A bitola 13 |
Material do corpo |
N/A Aço inoxidável 304 |
Material da alça |
N/A Cromado |
Opções de gaxetas – Faixa de temperatura |
N/A Polietileno (SG) / -95 °F a 175 °F, Epicloridrina (ECH) / -40 °F a 275 °F ou Borracha de silicone (HT) / -67 °F a 400 °F |
A – Dimensão |
N/A 19.750 pol. |
B – Dimensão |
N/A 23.500 pol. |
H – Dimensão |
N/A 3.000 pol. |
A1 – Dimensão |
N/A 20.750 pol. |
A2 – Dimensão |
N/A 23.250 pol. |
B1 – Dimensão |
N/A 24.750 pol. |
H1 – Dimensão |
N/A 3.500 pol. |
L1 – Dimensão |
N/A 4.500 pol. |
Quantidade |
N/A 2 |
Peso aproximado |
N/A 24.200 lb |