To send your information to Tsubaki, press this button
Super-H Series
Super-H Series Chain has the same wide waist as Super Series. The link plate thickness is identical to those of the ASME/ANSI Heavy Series roller chains. The same special manufacturing techniques used in Super Series Chain are used to produce the pitch holes. The pins are thru hardened. Because of this, Super-H Series Chain has an even higher Maximum Allowable Load than the Super Series.
Super-H Series Chain has the same wide waist as Super Series. The link plate thickness is identical to those of the ASME/ANSI Heavy Series roller chains. The same special manufacturing techniques used in Super Series Chain are used to produce the pitch holes. The pins are thru hardened. Because of this, Super-H Series Chain has an even higher Maximum Allowable Load than the Super Series.
Unit of Measure
Specifications
ANSI No. |
N/A 120 |
Standard Type of Pin |
N/A Riveted |
Strand |
N/A Double |
P - Pitch |
N/A 1.500 in |
R - Roller Diameter |
N/A 0.875 in |
W - Width Between Roller Link Plates |
N/A 1.000 in |
C - Transverse Pitch |
N/A 1.924 in |
Average Tensile Strength |
N/A 88100 lb |
Maximum Allowable Load |
N/A 16110 lb |
UPC Code |
N/A 097039415684 |
