To send your information to Tsubaki, press this button
U.S. Tsubaki offers the most complete line
of QD® and TAPER-LOCK weld-on hubs for
insertion and welding to produce “B” style
sprockets, sheaves, and other applications
without hub protrusion. To provide greater
strength for this type of shaft-locking
mechanism and to reduce heat distortion
caused by welding, these hubs are dimensionally the same as our sprocket items. Special
dimensional hubs are available per your specifications
on a made-to-order basis.
All U.S. Tsubaki hubs are made from steel
bar stock (not powdered or sintered metal).
The QD and TAPER-LOCK weld-on hubs
listed below include appropriate tapered
bores and mounting holes.
TAPER-LOCK® is a registered trademark of Rockwell Automation.
TAPER-LOCK® is a registered trademark of Rockwell Automation.
Unit of Measure
Specifications
Weight |
N/A 1.500 lb |
Use Bushing |
N/A 2012 |
D |
N/A 3.625 in |
P |
N/A 3.438 in |
L |
N/A 1.250 in |
T |
N/A 0.562 in |
Information |
N/A TAPER-LOCK type W weld-on hubs are designed for use in applications such as welding to plate sprockets, pulleys, and agitators. They are made of steel, drilled, tapped, and taper bored for TAPER-LOCK bushings. |
UPC Code |
N/A 097039387165 |
