TAPER-LOCK® Type W Weld-on Hubs
TAPER-LOCK® Weld-on Hubs
U.S. Tsubaki offers the most complete line
of QD® and TAPER-LOCK weld-on hubs for
insertion and welding to produce “B” style
sprockets, sheaves, and other applications
without hub protrusion. To provide greater
strength for this type of shaft-locking
mechanism and to reduce heat distortion
caused by welding, these hubs are dimensionally the same as our sprocket items. Special
dimensional hubs are available per your specifications
on a made-to-order basis.
All U.S. Tsubaki hubs are made from steel
bar stock (not powdered or sintered metal).
The QD and TAPER-LOCK weld-on hubs
listed below include appropriate tapered
bores and mounting holes.
TAPER-LOCK® is a registered trademark of Rockwell Automation.
TAPER-LOCK® is a registered trademark of Rockwell Automation.
Unit of Measure
Items |
W12 TAPER-LOCK® Type W Weld-on Hubs |
W16 TAPER-LOCK® Type W Weld-on Hubs |
W25 TAPER-LOCK® Type W Weld-on Hubs |
W30 TAPER-LOCK® Type W Weld-on Hubs |
W35 TAPER-LOCK® Type W Weld-on Hubs |
|||||
For Use with Bushing | N/A 1215 | N/A 1615 | N/A 2517 | N/A 3030 | N/A 3535 | |||||
Max. Bore of Bushing | N/A 0.500 in | N/A 0.500 in | N/A 0.500 in | N/A 0.938 in | N/A 1.188 in | |||||
A | N/A 2.875 in | N/A 3.250 in | N/A 4.875 in | N/A 5.500 in | N/A 6.750 in | |||||
B | N/A 1.500 in | N/A 1.500 in | N/A 1.750 in | N/A 3.000 in | N/A 3.500 in | |||||
C | N/A 0.375 in | N/A 0.375 in | N/A 0.500 in | N/A 0.750 in | N/A 1.250 in | |||||
Weight | N/A 1.300 lb | N/A 1.500 lb | N/A 4.000 lb | N/A 8.600 lb | N/A 15.000 lb | |||||
|