Call: 800.323.7790 | |  
BR-HT is mainly used in backstop applications as an integral part of a gear reducer. Prevention of reverse rotation for inclined conveyor and bucket elevator are typical application BR-HT assures not only the immediate backstop function under high torque, but also long service life by the “lift-off” design. In addition, installation on the high speed shaft with low torque enables selection of more compact models with resulting lower cost.
101 - 108 of 108 | Results Per Page | View | Unit of Measure
1 2 3 4 5 

Item #

Torque Capacity

Min. Inner Race Overrunning Speed

Max. Inner Race Overrunning Speed

Max. Engagement

Bore Size

B (Outer Race Width)

Sort by
BR25HT-B46B-30 N/A 295.0 lb·ft400.0 N·m N/A 800 rpm N/A 3600 rpm N/A 380 rpm N/A 1.181 in30.00 mm N/A 1.378 in35.00 mm
BR38HT-R61A-30 N/A 313.5 lb·ft425.0 N·m N/A 740 rpm N/A 3600 rpm N/A 400 rpm N/A 1.181 in30.00 mm N/A 0.984 in25.00 mm
BR38HT-R61A-35 N/A 313.5 lb·ft425.0 N·m N/A 740 rpm N/A 3600 rpm N/A 400 rpm N/A 1.378 in35.00 mm N/A 0.984 in25.00 mm
BR38HT-R61A-40 N/A 313.5 lb·ft425.0 N·m N/A 740 rpm N/A 3600 rpm N/A 400 rpm N/A 1.575 in40.00 mm N/A 0.984 in25.00 mm
BR38HT-R61A-45 N/A 313.5 lb·ft425.0 N·m N/A 740 rpm N/A 3600 rpm N/A 400 rpm N/A 1.772 in45.00 mm N/A 0.984 in25.00 mm
BR20HT-S20B-20 N/A 166.0 lb·ft225.0 N·m N/A 850 rpm N/A 3600 rpm N/A 400 rpm N/A 0.787 in20.00 mm N/A 1.378 in35.00 mm
BR18HT-R38A-25 N/A 114.3 lb·ft155.0 N·m N/A 850 rpm N/A 3600 rpm N/A 500 rpm N/A 0.984 in25.00 mm N/A 0.984 in25.00 mm
BR15HT-R31A-20 N/A 77.4 lb·ft105.0 N·m N/A 880 rpm N/A 3600 rpm N/A 550 rpm N/A 0.787 in20.00 mm N/A 0.984 in25.00 mm
101 - 108 of 108 | Results Per Page | View | Unit of Measure
1 2 3 4 5 
^