U.S. Tsubaki Power Transmission, LLC
U.S. Tsubaki Holdings, Inc.
Corporate Headquarters
301 E. Marquardt Dr.
Wheeling, IL 60090 USA

Toll Free: 800.323.7790
Phone: 847.459.9500
Fax: 847.459.9515
Email: sales@ustsubaki.com
Website: www.ustsubaki.com
Imprimir Traseiro
The T-Series uniquely transmits torque while accommodating misalignment without generating reactionary loads, increasing bearing life. Torque transmission capabilities up to 2,041,000 in.-lbs and shaft diameters to 20.00”. Coupling types range from close coupled to long span floating shaft couplings. The bolt on ring makes the T-Series a great fit for bidirectional and reversing applications. The T- Series has no metal-to-metal contact and in the event of a lock up, the insert will shear without damaging the connected equipment. Lubrication free and access to the insert without moving the connected equipment means replacing inserts with ease in minutes vs hours compared to lubricated coupling maintenance.

  • T-Series absorbs extreme torsional shock and vibration while accommodating angular, parallel, and axial misalignment without generating reactionary loads, which significantly increases bearing life.
  • No lubrication is required.
  • Standard inserts have a temperature range from -60° to 250° Fahrenheit with high temperature inserts available up to 350°.
  • The inserts are available in a range of hardness to meet most torsional stiffness and torque requirements, and offers very high resistance to chemicals.
  • T-Series couplings are suitable for blind assembly, horizontal or vertical, reversing, and stop/start applications.
  • The compact size to torque ratio with generous bore capacity allows proper sizing.
  • Hubs are available for use with tapered bushings, Iock assemblies, shrink discs, finished bored and keyed, taper bored, and spline bored.
  • OnyxShield™ couplings are available for enhanced corrosion and wear resistance.
Unidade de medida

Especificações

G

 N/A 16.200 pol.

D1

 N/A 18.020 pol.

MBFH

 N/A 9.000 pol.

MBRH

 N/A 10.375 pol.

MBHD

 N/A 13.250 pol.

RSB

 N/A 2.900 pol.

E

 N/A 0.200 pol.

D2

 N/A 12.775 pol.

D3

 N/A 13.780 pol.

D4

 N/A 13.875 pol.

HD

 N/A 17.670 pol.

L1

 N/A 8.000 pol.

L2

 N/A 8.000 pol.

L3

 N/A 3.875 pol.

L4

 N/A 6.440 pol.

L5

 N/A 1.500 pol.

L6

 N/A 4.385 pol.

DRC

 N/A 8.010 pol.

SS

 N/A 1-8 pol.

Weight with RSB hubs

 N/A 600 lb

Max RPM Balanced G2.5 Standard

 N/A 1450

Max RPM Unbalanced Standard

 N/A 2100

Insert Type Yellow

Continuous Standard - Yellow

 N/A 304000 lb·pol.

Intermittent Standard - Yellow

 N/A 500000 lb·pol.

HP at 100 RPM Standard - Yellow

 N/A 482 SF1

Temperature [Max] Standard - Yellow

 N/A 250 °F

Temperature [Min] Standard - Yellow

 N/A -60 °F

Insert Type Orange

Continuous - Orange

 N/A 452000 lb·pol.

Intermittent - Orange

 N/A 603000 lb·pol.

Temp Rating - Orange

 N/A -20/250 °F

Durometer - Orange

 N/A 70D

Insert Type Red

Continuous - Red

 N/A 258400 lb·pol.

Intermittent - Red

 N/A 425000 lb·pol.

Temp Rating - Red

 N/A 20/350 °F

Durometer - Red

 N/A 90A

Insert Type Green

Continuous - Green

 N/A 125250 lb·pol.

Intermittent - Green

 N/A 206250 lb·pol.

Temp Rating - Green

 N/A -60/250 °F

Durometer - Green

 N/A 90A