U.S. Tsubaki Power Transmission, LLC
U.S. Tsubaki Holdings, Inc.
Corporate Headquarters
301 E. Marquardt Dr.
Wheeling, IL 60090 USA

Toll Free: 800.323.7790
Phone: 847.459.9500
Fax: 847.459.9515
Email: sales@ustsubaki.com
Website: www.ustsubaki.com
Imprimir Traseiro
The T-Series uniquely transmits torque while accommodating misalignment without generating reactionary loads, increasing bearing life. Torque transmission capabilities up to 2,041,000 in.-lbs and shaft diameters to 20.00”. Coupling types range from close coupled to long span floating shaft couplings. The bolt on ring makes the T-Series a great fit for bidirectional and reversing applications. The T- Series has no metal-to-metal contact and in the event of a lock up, the insert will shear without damaging the connected equipment. Lubrication free and access to the insert without moving the connected equipment means replacing inserts with ease in minutes vs hours compared to lubricated coupling maintenance.

  • T-Series absorbs extreme torsional shock and vibration while accommodating angular, parallel, and axial misalignment without generating reactionary loads, which significantly increases bearing life.
  • No lubrication is required.
  • Standard inserts have a temperature range from -60° to 250° Fahrenheit with high temperature inserts available up to 350°.
  • The inserts are available in a range of hardness to meet most torsional stiffness and torque requirements, and offers very high resistance to chemicals.
  • T-Series couplings are suitable for blind assembly, horizontal or vertical, reversing, and stop/start applications.
  • The compact size to torque ratio with generous bore capacity allows proper sizing.
  • Hubs are available for use with tapered bushings, Iock assemblies, shrink discs, finished bored and keyed, taper bored, and spline bored.
  • OnyxShield™ couplings are available for enhanced corrosion and wear resistance.
Unidade de medida

Especificações

G

 N/A 12.200 pol.

D1

 N/A 13.600 pol.

MBFH

 N/A 6.250 pol.

MBRH

 N/A 7.250 pol.

MBHD

 N/A 9.250 pol.

RSB

 N/A 1.750 pol.

E

 N/A 0.200 pol.

D2

 N/A 9.250 pol.

D3

 N/A 10.065 pol.

D4

 N/A 10.750 pol.

HD

 N/A 13.250 pol.

L1

 N/A 6.000 pol.

L2

 N/A 6.000 pol.

L3

 N/A 2.485 pol.

L4

 N/A 4.815 pol.

L5

 N/A 1.125 pol.

L6

 N/A 3.795 pol.

DRC

 N/A 6.815 pol.

SS

 N/A 1-8 pol.

Weight with RSB hubs

 N/A 285 lb

Max RPM Balanced G2.5 Standard

 N/A 2300

Max RPM Unbalanced Standard

 N/A 3600

Insert Type Yellow HD

Continuous Standard HD

 N/A 156000 lb·pol.

Intermittent Standard HD

 N/A 260000 lb·pol.

HP at 100 RPM Standard HD

 N/A 248 SF1

Temperature [Max] Standard HD

 N/A 250 °F

Temperature [Min] Standard HD

 N/A -60 °F

Durometer Standard HD

 N/A 60D

Insert Type Orange HD

Continuous - Orange HD

 N/A 260000 lb·pol.

Intermittent - Orange HD

 N/A 390000 lb·pol.

Temp Rating - Orange HD

 N/A -20/250 °F

Durometer - Orange HD

 N/A 70D

Insert Type Red HD

Continuous - Red HD

 N/A 132600 lb·pol.

Intermittent - Red HD

 N/A 221000 lb·pol.

Temp Rating - Red HD

 N/A 20/350 °F

Durometer - Red HD

 N/A 90A

Insert Type Green HD

Continuous - Green HD

 N/A 70200 lb·pol.

Intermittent - Green HD

 N/A 97500 lb·pol.

Temp Rating - Green HD

 N/A -60/250 °F

Durometer - Green HD

 N/A 90A