Nº. do item BS200F, BS200F Backstop Em U.S. Tsubaki Inc.

Tsubaki’s new BS-F Series backstops are designed for simple, drop-in installation to all major competitive external, low-speed backstop products. These backstops use a unique labyrinth seal design for maximum life with minimal maintenance. With Tsubaki’s innovative design features, our backstops ensure efficient and dependable operation in the harshest environments.

TYPICAL APPLICATIONS

Mining (Coal, Copper, Potash) - used in inclined conveyors and bucket elevators for transporting raw materials.
Power Generating Plants - used in inclined conveyors to transfer coal from the stockpile to the boiler rooms.
Cement Plants - used in bucket elevators and inclined conveyors for moving limestone and clay to crushers and silos.

COMMON INDUSTRIES
MINING
POWER GENERATING PLANTS
CEMENT
PORTS

INNOVATIVE FEATURES:
NON-ROLLOVER CAM

Provides higher torque ratings than the leading competitors due to the larger profile and greater contact area.
Improves performance and prevents costly and potentially dangerous rollover.

SPECIAL LABYRINTH SEAL

New seal design prevents the ingress of dust and other contaminants typically found in mining and cement plants, which extends the life of the lubricant.
Minimizes heat generation and provides trouble-free service with minimal scheduled maintenance.

Superior Performance in the Harshest Environments

GREASE LUBRICATION

Offers synthetic grease lubrication in a sealed backstop design.
Breather element is eliminated.
No need to monitor oil levels, refill the backstop or worry about moisture in the lubricant.
Provides trouble-free performance with minimized maintenance requirements.

DROP IN DESIGN

Tsubaki offers the narrowest backstop with an I-beam torque arm.
Quick and easy field replacement. Drop in compatible with most competitive products.

3 STEP
EASY CONNECTION
Step 1: Insert I-beam torque arm into clutch
Step 2: Insert lock pins through flange plate and secure torque arm
Step 3: Insert retaining pins into lock pins

Unidade de medida

Especificações

Intervalo de orifício – máx.	N/A 7.870 pol.200.00 mm
Intervalo de orifício – mín.	N/A 3.940 pol.100.00 mm
Torque Capacity	N/A 45500 lb·pé61700 N·m
Velocidade máxima de avanço do anel interno	N/A 180 rpm
Torque de arrasto	N/A 32.430 lb·pé44.00 N·m
A – Largura do contrarrecuo	N/A 5.910 pol.150.00 mm
B – Comprimento total	N/A 16.930 pol.430.00 mm
C – Largura interna	N/A 5.590 pol.142.00 mm
D – Linha central do contrarrecuo até a borda do flange	N/A 11.180 pol.284.00 mm
E – Diâmetro interno do escareamento	N/A 9.880 pol.251.00 mm
F – Largura total do anel interno	N/A 5.910 pol.150.00 mm
G – Profundidade do escareamento	N/A 0.160 pol.4.00 mm
H – Largura total do contrarrecuo	N/A 7.010 pol.178.00 mm
J – Distância da linha central do contrarrecuo à borda da viga I	N/A 72.010 pol.1829.00 mm
K – Altura do braço de torque	N/A 7.990 pol.203.00 mm
L – Largura do braço de torque	N/A 4.170 pol.106.00 mm
Quantidade de graxa	N/A 0.420 lb0.190 kg
Peso – com braço de torque – orifício mínimo	N/A 578.600 lb263.000 kg
Peso – com braço de torque – orifício máximo	N/A 517.000 lb235.000 kg
Peso – sem braço de torque – orifício mínimo	N/A 407.000 lb185.000 kg
Peso – sem braço de torque – máx. Orifício	N/A 345.400 lb157.000 kg

Especificações

Intervalo de orifício – máx.

Intervalo de orifício – mín.

Torque Capacity

Velocidade máxima de avanço do anel interno

Torque de arrasto

A – Largura do contrarrecuo

B – Comprimento total

C – Largura interna

D – Linha central do contrarrecuo até a borda do flange

E – Diâmetro interno do escareamento

F – Largura total do anel interno

G – Profundidade do escareamento

H – Largura total do contrarrecuo

J – Distância da linha central do contrarrecuo à borda da viga I

K – Altura do braço de torque

L – Largura do braço de torque

Quantidade de graxa

Peso – com braço de torque – orifício mínimo

Peso – com braço de torque – orifício máximo

Peso – sem braço de torque – orifício mínimo

Peso – sem braço de torque – máx. Orifício