MultiCAD Download (0) ▾
  • Cart is empty
  1. Request CAD files
Request Quote/Info Add to CAD Cart
To send your information to Tsubaki, press this button
Metric bore sizes are available upon request and are subject to an alteration charge shown on discount multiplier sheets.

All TAPER-LOCK Bushings are available in steel from stock.
Stainless steel bushings are available on a quoted basis.
Unit of Measure

Specifications

Bushing

 N/A 1310
Bore Range1 N/A 0.500 to 1.375 in

A

 N/A 2.000 in

B

 N/A 1.000 in

D

 N/A 1.875 in
F2 N/A 3/8 x 5/8 in
L - Short Hex Key3 N/A 1.375 in
L - Standard Key4 N/A 0.813 in
M - Short Hex Key5 N/A 1.625 in
M - Key6 N/A 1.063 in

Weight

 N/A 0.650 lb
  • 1 All bore ranges available in 1/16th inch increments.
  • 2 2 Required
  • 3 Space required to tighten bushing. Also space required to loosen screws to permit removal of hub by puller.
  • 4 Space required to tighten bushing. Also space required to loosen screws to permit removal of hub by puller.
    Standard hex key cut to minimum usable length.
  • 5 Space required to remove bushing using jackscrews - no puller required.
  • 6 Space required to remove bushing using jackscrews - no puller required.
    Standard hex key cut to minimum usable length.