LAMBDA for corrosion resistance in conveyor applications.
All dimensions are nominal values and for reference only
Specifications
ANSI No. |
N/A 80 |
Material |
N/A Nickel-Plated |
P - Pitch |
N/A 1.000 in |
R - Roller Diameter |
N/A 0.625 in |
W - Width Between Roller Link Plates |
N/A 0.625 in |
L1 - From Pin Head to C.L. |
N/A 0.640 in |
L2 - From Pin End to C.L. |
N/A 0.758 in |
Average Tensile Strength |
N/A 14300 lb |
Maximum Allowable Load |
N/A 2400 lb |
Approx. Weight |
N/A 1.790 lbs/ft |
Connecting Links |
N/A Cottered Pins |
Information
N/A
1. Conveyor LAMBDA should not be used in drive applications. It is designed for conveyor applications where the speeds are generally lower and the center distances are longer than those found in drive applications. Conveyor series LAMBDA, except for RSC35-LAMBDA, has the same dimensions and the same working load as our standard attachment chain and the same link plate thickness as standard. RS35 standard connecting links cannot be used for RSC35-LAMBDA due to the difference in pin diameter. |