Request Quote/Info
To send your information to Tsubaki, press this button
Standard Single Pitch Conveyor LAMBDA®
LAMBDA for conveyor applications.
  • Operates in temperatures up to 302°F
  • Cost-effective, lube-free conveyor chain for your operation
  • A variety of attachments for industry specific applications


    • All dimensions are nominal values and for reference only
    Unit of Measure

    Specifications

    ANSI No.

    		 N/A 50

    Material 

    		 N/A Standard

    P - Pitch

    		 N/A 0.625 in

    R - Roller Diameter

    		 N/A 0.400 in

    W - Width Between Roller Link Plates

    		 N/A 0.375 in

    L1 - From Pin Head to C.L.

    		 N/A 0.406 in

    L2 - From Pin End to C.L.

    		 N/A 0.472 in

    Average Tensile Strength

    		 N/A 5730 lb

    Maximum Allowable Load

    		 N/A 970 lb

    Approx. Weight

    		 N/A 0.700 lbs/ft

    Link Plate

    T - Thickness

    		 N/A 0.080 in

    Information

    N/A 1. Conveyor LAMBDA should not be used in drive applications. It is designed for conveyor applications where the speeds are generally lower and the center distances are longer than those found in drive applications. Conveyor series LAMBDA, except for RSC35-LAMBDA, has the same dimensions and the same working load as our standard attachment chain and the same link plate thickness as standard. RS35 standard connecting links cannot be used for RSC35-LAMBDA due to the difference in pin diameter.
    2. Drive LAMBDA and Conveyor LAMBDA chains cannot be intercoupled.