Request Quote/Info
To send your information to Tsubaki, press this button
Standard Single Pitch Conveyor LAMBDA®
LAMBDA for conveyor applications.
  • Operates in temperatures up to 302°F
  • Cost-effective, lube-free conveyor chain for your operation
  • A variety of attachments for industry specific applications
  • lasts up to 5 times longer than standard roller chain without additional lubrication.

Roller Diameter = Bushing Diameter

All dimensions are nominal values and for reference only
Unit of Measure

Specifications

ANSI No.

 N/A 35

Material 

 N/A Standard

P - Pitch

 N/A 0.375 in

R - Roller Diameter

 N/A 0.200 in

W - Width Between Roller Link Plates

 N/A 0.188 in

L1 - From Pin Head to C.L.

 N/A 0.230 in

L2 - From Pin End to C.L.

 N/A 0.270 in

Average Tensile Strength

 N/A 2115 lb

Maximum Allowable Load

 N/A 342 lb

Approx. Weight

 N/A 0.220 lbs/ft

Chain Type 

 N/A Rollerless

Link Plate

T - Thickness

 N/A 0.050 in

Information

N/A 1. Conveyor LAMBDA should not be used in drive applications. It is designed for conveyor applications where the speeds are generally lower and the center distances are longer than those found in drive applications. Conveyor series LAMBDA, except for RSC35-LAMBDA, has the same dimensions and the same working load as our standard attachment chain and the same link plate thickness as standard. RS35 standard connecting links cannot be used for RSC35-LAMBDA due to the difference in pin diameter.
2. Drive LAMBDA and Conveyor LAMBDA chains cannot be intercoupled.