Request Quote/Info
To send your information to Tsubaki, press this button
  • Designed to fit small hub diameters
  • Tapered design allows for accurate shaft to hub alignement
  • Available in metric sizes from: 5mm - 100mm


    • For selection and application see Technical Notes download
    Unit of Measure

    Specifications

    d - Shaft O.D.

    		 N/A 3.346 in85 mm

    t1 - Shaft Dia. Tolerance

    		 N/A -0.0021 in +0

    D - Hub Counter I.D.

    		 N/A 4.173 in106 mm

    t2 - Hub Counter ID Tolerance

    		 N/A +0.0021 in -0

    l

    		 N/A 2.559 in65 mm

    L0

    		 N/A 3.386 in86 mm

    L1

    		 N/A 3.780 in96 mm

    Lt

    		 N/A 4.173 in106 mm

    D1

    		 N/A 5.394 in137 mm

    D2

    		 N/A 5.157 in131 mm

    Transmissible Torque

    		 N/A 6144 ft·lb

    Transmissible Thrust

    		 N/A 44000 lb196 kN

    P - Contact Pressure - Shaft

    		 N/A 14649 psi101 MPa

    P' - Contact Pressure - Hub Bore

    		 N/A 10878 psi75 MPa

    Weight

    		 N/A 8.400 lb3.81 kg

    Locking Bolts

    Quantity

    		 N/A 12

    Size

    		 N/A M10x25

    Tightening Torque

    		 N/A 60.000 ft·lb

    Features & Application

    N/A

    • Same Inner and Outer Diameters as the EL Series
      Designed with the same inner and outer diameters as an EL Series POWER-LOCK.
    • Self-Centering
      These units provide accurate shaft-hub alignment and concentricity, allowing straight bore mounting.
    • Simple Construction
      Constructed with only an inner and an outer ring and locking bolts. Simply tighten these bolts to achieve a completely secure connection.