Request Quote/Info
To send your information to Tsubaki, press this button
  • Corrosion protection
  • Global standard for keyless shaft locking
  • Built in tap holes for easy removal
  • Inch size range: 3/4" thru 4"


For selection and application see Technical Notes download
Unit of Measure

Specifications

d - Shaft O.D.

 N/A 3.750 in

t1 - Shaft Dia. Tolerance

 N/A -0.0021 in +0

D - Hub Counter I.D.

 N/A 5.305 in

t2 - Hub Counter ID Tolerance

 N/A +0.0025 in -0

L

 N/A 1.151 in

l

 N/A 0.984 in

Lt

 N/A 1.544 in

Transmissible Torque

 N/A 4772 ft·lb

Transmissible Thrust

 N/A 31022 lb

P - Contact Pressure - Shaft

 N/A 23497 psi

P' - Contact Pressure - Hub Bore

 N/A 16535 psi

Weight

 N/A 3.300 lb

Locking Bolts

Quantity

 N/A 13

Size

 N/A M10x25

Tightening Torque

 N/A 50.000 ft·lb

Features & Application

N/A

  • Multipurpose
    Ideally structured and highly reliable locking device
  • Low Machining Costs
    Keyway, splines, presses and thermal fittings are not required. Optimum performance is achieved with low shaft and hub tolerances minimizing the total machining costs.
  • Easy to Install
    Install or removes just by tightening or loosening of bolts. No need to hassle with adjusting keyways and thermal fittings.
  • Options to Fit Every Application
    Stainless Steel and electroless nickle plating options are offered for standard models. Both are highly durable in corrosive or clean room environments.