To send your information to Tsubaki, press this button
  • Most popular series world-wide
  • Easy machining of shaft and hub
  • Can use on shafts with a keyway
  • Inch size range: 3/4" thru 11-13/16"


For selection and application see Technical Notes download
Unit of Measure

Specifications

d - Shaft O.D.

N/A 7.000 in

t1 - Shaft Dia. Tolerance

N/A -0.0025 in +0

D - Hub Counter I.D.

N/A 9.252 in

t2 - Hub Counter ID Tolerance

N/A +0.0028 in -0

L

N/A 1.732 in

l

N/A 1.575 in

Lt

N/A 2.283 in

Transmissible Torque

N/A 27990 ft·lb

Transmissible Thrust

N/A 95700 lb

P - Contact Pressure - Shaft

N/A 23180 psi

P' - Contact Pressure - Hub Bore

N/A 17490 psi

Weight

N/A 13.000 lb

UPC Code

N/A 097039586384

Locking Bolts

Quantity

N/A 17

Size

N/A M14x40

Tightening Torque

N/A 167.000 ft·lb

Features & Application

N/A

  • Multipurpose
    Ideally structured and highly reliable locking device
  • Low Machining Costs
    Keyway, splines, presses and thermal fittings are not required. Optimum performance is achieved with low shaft and hub tolerances minimizing the total machining costs.
  • Easy to Install
    Install or removes just by tightening or loosening of bolts. No need to hassle with adjusting keyways and thermal fittings.
  • Options to Fit Every Application
    Stainless Steel and electroless nickle plating options are offered for standard models. Both are highly durable in corrosive or clean room environments.