U.S. Tsubaki Power Transmission, LLC
U.S. Tsubaki Holdings, Inc.
Oficinas centrales
301 E. Marquardt Dr.
Wheeling, IL 60090 EE. UU.

Número de teléfono gratuito: 800.323.7790
Teléfono: 847.459.9500
Fax: 847.459.9515
Correo electrónico: sales@ustsubaki.com
Sitio web: www.ustsubaki.com
Imprimir Atrás
TFS Series Cam Clutch is a sprag type clutch designed for press fit installation. Sprag type designs typically have a higher torque capacity than a similarly sized ramp & roller type clutch. TFS has two vertical keyways on the outer race to assist with locating. Outside dimensions are the same as Series 63 ball bearings. This design is ideal for general inner or outer race overrunning applications. Since the TFS Series does not include an integral bearing, installing the TFS Cam Clutch next to a bearing which handles both the axial and radial loads is the typical application.
Unidad de medida

Especificaciones

Código universal de producto (UPC)

 N/D 097039970763

Tamaño de diámetro interior

 N/D 0.472 in12.00 mm

Capacidad de torque

 N/D 13.3 lb·ft18.0 N·m

Sobremarcha máx. del anillo interior

 N/D 4500 r. p. m.

Sobremarcha máx. del anillo exterior

 N/D 2300 r. p. m.

Torque de arrastre

 N/D 0.030 lb·ft0.04 N·m

Chavetero

 N/D 4 mm × 1,8 mm

A (Ancho total)

 N/D 0.512 in13.00 mm

B (Diámetro total)

 N/D 1.378 in35.00 mm

C (Diámetro interior del anillo exterior)

 N/D 1.181 in30.00 mm

D (Diámetro interior del anillo interior)

 N/D 0.709 in18.00 mm

E (Bisel)

 N/D 0.024 in0.60 mm

F (Bisel)

 N/D 0.012 in0.30 mm

G (Ancho de la ranura)

 N/D 0.157 in4.00 mm

H (Profundidad de la ranura)

 N/D 0.055 in0.06 mm

Peso

 N/D 0.150 lb0.068 kg