Item have no hub step. U.S. Tsubaki offers the most complete line
of QD® and TAPER-LOCK weld-on hubs for
insertion and welding to produce “B” style
sprockets, sheaves, and other applications
without hub protrusion. To provide greater
strength for this type of shaft-locking
mechanism and to reduce heat distortion
caused by welding, these hubs are dimensionally the same as our sprocket items. Special
dimensional hubs are available per your specifications
on a made-to-order basis.
All U.S. Tsubaki hubs are made from steel
bar stock (not powdered or sintered metal).
The QD and TAPER-LOCK weld-on hubs
listed below include appropriate tapered
bores and mounting holes. TAPER-LOCK® is a registered trademark of Rockwell Automation. QD® is a registered trademark of and is used under license from
Tsubaki E&M Co.
All dimensions are nominal values and for reference only
Unit of Measure
Specifications
Weight
N/A42.000 lb
Use Bushing
N/A4545
D
N/A8.750 in
P
N/A8.750 in
L
N/A4.500 in
T
N/A1.500 in
Information
N/ATAPER-LOCK type W weld-on hubs are
designed for use in applications such as
welding to plate sprockets, pulleys, and
agitators. They are made of steel, drilled,
tapped, and taper bored for TAPER-LOCK
bushings.