U.S. Tsubaki Power Transmission, LLC
U.S. Tsubaki Holdings, Inc.
Corporate Headquarters
301 E. Marquardt Dr.
Wheeling, IL 60090 USA

Toll Free: 800.323.7790
Phone: 847.459.9500
Fax: 847.459.9515
Email: sales@ustsubaki.com
Website: www.ustsubaki.com
Print Back
U.S. Tsubaki offers the most complete line of QD® and TAPER-LOCK weld-on hubs for insertion and welding to produce “B” style sprockets, sheaves, and other applications without hub protrusion. To provide greater strength for this type of shaft-locking mechanism and to reduce heat distortion caused by welding, these hubs are dimensionally the same as our sprocket items. Special dimensional hubs are available per your specifications on a made-to-order basis. All U.S. Tsubaki hubs are made from steel bar stock (not powdered or sintered metal). The QD and TAPER-LOCK weld-on hubs listed below include appropriate tapered bores and mounting holes.
TAPER-LOCK® is a registered trademark of Rockwell Automation.
Unit of Measure

Specifications

Type 

 N/A W

For Use with Bushing

 N/A 1615

Max. Bore of Bushing

 N/A 0.500 in

A

 N/A 3.250 in

B

 N/A 1.500 in

C

 N/A 0.375 in

D

 N/A 0.625 in

F

 N/A 0.375 in

G

 N/A 2.875 in

H

 N/A 2.750 in

J

 N/A 2.375 in

K

 N/A 3.000 in

Weight

 N/A 1.500 lb

UPC Code

 N/A 097039387301

Additional Information

Information

 N/A TAPER-LOCK type W weld-on hubs are designed for use in applications such as welding to plate sprockets, pulleys, and agitators. They are made of steel, drilled, tapped, and taper bored for TAPER-LOCK bushings.