Item # 2525, TAPER-LOCK® Bushings - 1008 through 3030 On U.S. Tsubaki Inc.

Metric bore sizes are available upon request and are subject to an alteration charge shown on discount multiplier sheets.

All TAPER-LOCK Bushings are available in steel from stock.
Stainless steel bushings are available on a quoted basis.

Unit of Measure

Specifications

Bushing	N/A 2525
Bore Range¹	N/A 0.750 to 2.500 in
A	N/A 3.375 in
B	N/A 2.500 in
D	N/A 3.250 in
F²	N/A 1/2 x 1 in
L - Short Hex Key³	N/A 1.625 in
L - Standard Key⁴	N/A 1.000 in
M - Short Hex Key⁵	N/A 2.250 in
M - Key⁶	N/A 1.625 in
Weight	N/A 4.300 lb

¹ All bore ranges available in 1/16th inch increments.
² 2 Required
³ Space required to tighten bushing. Also space required to loosen screws to permit removal of hub by puller.
⁴ Space required to tighten bushing. Also space required to loosen screws to permit removal of hub by puller.
Standard hex key cut to minimum usable length.
⁵ Space required to remove bushing using jackscrews - no puller required.
⁶ Space required to remove bushing using jackscrews - no puller required.
Standard hex key cut to minimum usable length.

Specifications

Bushing

A

B

D

Weight