To send your information to Tsubaki, press this button
LAMBDA for lube-free drive applications
- Operates in temperatures up to 302°F
- Same maximum allowable load as our standard RS chain
- Available in sizes from RSD40 to RSD140
Unit of Measure
Specifications
ANSI No. |
N/A 40 |
Standard Type of Pin |
N/A Riveted |
P - Pitch |
N/A 0.500 in |
R - Roller Diameter |
N/A 0.312 in |
W - Width Between Roller Link Plates1 | N/A 0.297 in |
C - Transverse Pitch |
N/A 0.646 in |
Average Tensile Strength |
N/A 8600 lb |
Maximum Allowable Load |
N/A 1390 lb |
- 1 Width between roller link plates (W) is slightly narrower than ANSI standard, however this chain runs on standard sprockets.