To send your information to Tsubaki, press this button
The stay pin series (SK02, SK04) resists lateral loads on the chain, and the side roller series (SK03, SK04) prevents tools from tilting and facilitates their positioning.
The chain can be supplied fitted with plastic pots.
SK Type Tool Holder chain utilizes roller chain components and specially configured side plates.
SK Type ATC chain works with standard sprockets.
Shanks No. 45 and 60 are available upon request.
SK Type Tool Holder chain utilizes roller chain components and specially configured side plates.
SK Type ATC chain works with standard sprockets.
Shanks No. 45 and 60 are available upon request.
Unit of Measure
Shank Number |
N/A 50 |
P - Pitch |
N/A 5.250 in |
P1 |
N/A 3.500 in |
P2 |
N/A 1.750 in |
O |
N/A 3.071 in |
C1 |
N/A 3.150 in |
l |
N/A 3.850 in |
Xs |
N/A 5.236 in |
L1 |
N/A 2.697 in |
L2 |
N/A 2.697 in |
C |
N/A 1.925 in |
W |
N/A 1.000 in |
R |
N/A 1.000 in |
T |
N/A 0.270 in |
Rs |
N/A 0.875 in |
Ls |
N/A 0.496 in |
Chain Weight per Pot |
N/A 5.700 lb |
Type |
N/A Tool Pot (Engeneering Plastic) |
