LAMBDA for corrosion resistance
  • Operates in temperatures up to 302°F
  • Ideal for mildly corrosive environments
  • Long-lasting and lube-free


Note:
1. Drive and Conveyor series LAMBDA chains cannot be intercoupled or interchanged.
2. The heavy roller link plates on Drive Lambda slightly increase the width, which means Drive LAMBDA connecting links are required.
3. Connecting links for RSD80NP-LAMBDA to RSD140NP-LAMBDA have cottered pins.
Unit of Measure
Items
Nickel-Plated Drive Lambda® Lube-Free Chains

Nickel-Plated Single Strand Drive Lambda® Chains

Nickel-Plated Drive Lambda® Lube-Free Chains

Nickel-Plated Single Strand Drive Lambda® Chains

Nickel-Plated Drive Lambda® Lube-Free Chains

Nickel-Plated Single Strand Drive Lambda® Chains

Nickel-Plated Drive Lambda® Lube-Free Chains

Nickel-Plated Single Strand Drive Lambda® Chains

Nickel-Plated Drive Lambda® Lube-Free Chains

Nickel-Plated Single Strand Drive Lambda® Chains
ANSI No. N/A 40 N/A 50 N/A 60 N/A 80 N/A 100
Standard Type of Pin N/A Riveted
P - Pitch N/A 0.500 in N/A 0.625 in N/A 0.750 in N/A 1.000 in N/A 1.250 in
R - Roller Diameter N/A 0.312 in N/A 0.400 in N/A 0.469 in N/A 0.625 in N/A 0.750 in
W - Width Between Roller Link Plates1 N/A 0.297 in N/A 0.365 in N/A 0.483 in N/A 0.609 in N/A 0.736 in
T1 - PLP Thickness N/A 0.060 in N/A 0.080 in N/A 0.094 in N/A 0.125 in N/A 0.156 in
T2 - RLP Thickness N/A 0.080 in N/A 0.094 in N/A 0.125 in N/A 0.156 in N/A 0.187 in
H - RLP Height N/A 0.472 in N/A 0.591 in N/A 0.713 in N/A 0.949 in N/A 1.185 in
h - PLP Height N/A 0.409 in N/A 0.512 in N/A 0.614 in N/A 0.819 in N/A 1.024 in
D N/A 0.156 in N/A 0.200 in N/A 0.234 in N/A 0.312 in N/A 0.375 in
L1 N/A 0.344 in N/A 0.423 in N/A 0.541 in N/A 0.675 in N/A 0.813 in
L2 N/A 0.411 in N/A 0.490 in N/A 0.616 in N/A 0.797 in N/A 0.939 in
L N/A 0.787 in N/A 0.945 in N/A 1.260 in N/A 1.571 in N/A 1.870 in
Average Tensile Strength N/A 4300 lb N/A 7050 lb N/A 9920 lb N/A 17600 lb N/A 26500 lb
Maximum Allowable Load N/A 683 lb N/A 1210 lb N/A 1630 lb N/A 2870 lb N/A 4300 lb
  • 1 Width between roller link plates (W) is slightly narrower than ANSI standard, however this chain runs on standard sprockets.