• Designed to fit small hub diameters
  • Tapered design allows for accurate shaft to hub alignement
  • Available in metric sizes from: 5mm - 100mm


  • P and P' represent the average contact pressure applied to the shaft and hub respectively. These values may vary from -20% to +40%, depending on the amount of friction applied to the bolts. Transmissible torque Mt and transmissible thrust Pax are calculated from the minimum allowable contact pressure.

    Notes)

    1. Stocked models are in bold.

    2. Mt indicates torque at 0 transmissible thrust, while Pax indicates transmissible thrust at 0 torque. If transmissible torque and thrust apply simultaneously calculate and compare the combined value with the transmissible torque provided in the table.

    3. Dimensions when this product is attached to the shaft and hub.
    26 - 33 of 33 | Results Per Page | View | Unit of Measure
    1 2 

    Item #

    d - Shaft O.D.

    D - Hub Counter I.D.

    l

    L0

    L1

    Lt

    Sort by
    N/A 2.165 in55 mm N/A 2.795 in71 mm N/A 2.165 in55 mm N/A 2.835 in72 mm N/A 3.150 in80 mm N/A 3.465 in88 mm
    N/A 2.362 in60 mm N/A 3.031 in77 mm N/A 2.165 in55 mm N/A 2.835 in72 mm N/A 3.150 in80 mm N/A 3.465 in88 mm
    N/A 2.559 in65 mm N/A 3.307 in84 mm N/A 2.165 in55 mm N/A 2.835 in72 mm N/A 3.150 in80 mm N/A 3.465 in88 mm
    N/A 3.346 in85 mm N/A 4.173 in106 mm N/A 2.559 in65 mm N/A 3.386 in86 mm N/A 3.780 in96 mm N/A 4.173 in106 mm
    N/A 3.543 in90 mm N/A 4.409 in112 mm N/A 2.559 in65 mm N/A 3.386 in86 mm N/A 3.780 in96 mm N/A 4.173 in106 mm
    N/A 2.953 in75 mm N/A 3.740 in95 mm N/A 2.559 in65 mm N/A 3.386 in86 mm N/A 3.780 in96 mm N/A 4.173 in106 mm
    N/A 3.150 in80 mm N/A 3.937 in100 mm N/A 2.559 in65 mm N/A 3.386 in86 mm N/A 3.780 in96 mm N/A 4.173 in106 mm
    N/A 2.756 in70 mm N/A 3.543 in90 mm N/A 2.559 in65 mm N/A 3.386 in86 mm N/A 3.780 in96 mm N/A 4.173 in106 mm
    26 - 33 of 33 | Results Per Page | View | Unit of Measure
    1 2