U.S. Tsubaki Power Transmission, LLC
U.S. Tsubaki Holdings, Inc.
Corporate Headquarters
301 E. Marquardt Dr.
Wheeling, IL 60090 USA

Toll Free: 800.323.7790
Phone: 847.459.9500
Fax: 847.459.9515
Email: sales@ustsubaki.com
Website: www.ustsubaki.com
Imprimir Traseiro
The T-Series uniquely transmits torque while accommodating misalignment without generating reactionary loads, increasing bearing life. Torque transmission capabilities up to 2,041,000 in.-lbs and shaft diameters to 20.00”. Coupling types range from close coupled to long span floating shaft couplings. The bolt on ring makes the T-Series a great fit for bidirectional and reversing applications. The T- Series has no metal-to-metal contact and in the event of a lock up, the insert will shear without damaging the connected equipment. Lubrication free and access to the insert without moving the connected equipment means replacing inserts with ease in minutes vs hours compared to lubricated coupling maintenance.

  • T-Series absorbs extreme torsional shock and vibration while accommodating angular, parallel, and axial misalignment without generating reactionary loads, which significantly increases bearing life.
  • No lubrication is required.
  • Standard inserts have a temperature range from -60° to 250° Fahrenheit with high temperature inserts available up to 350°.
  • The inserts are available in a range of hardness to meet most torsional stiffness and torque requirements, and offers very high resistance to chemicals.
  • T-Series couplings are suitable for blind assembly, horizontal or vertical, reversing, and stop/start applications.
  • The compact size to torque ratio with generous bore capacity allows proper sizing.
  • Hubs are available for use with tapered bushings, Iock assemblies, shrink discs, finished bored and keyed, taper bored, and spline bored.
  • OnyxShield™ couplings are available for enhanced corrosion and wear resistance.
Unidade de medida

Especificações

DBSE

 N/A 3.000 pol.

G

 N/A 5.100 pol.

D1

 N/A 6.290 pol.

MBFH

 N/A 2.500 pol.

MBRH

 N/A 3.375 pol.

MBHD

 N/A 4.500 pol.

RSB

 N/A 0.625 pol.

E

 N/A 0.100 pol.

D2

 N/A 4.000 pol.

D3

 N/A 4.500 pol.

D4

 N/A 5.000 pol.

HD

 N/A 6.125 pol.

L1

 N/A 2.500 pol.

L2

 N/A 2.500 pol.

L3

 N/A 1.100 pol.

L4

 N/A 1.825 pol.

L5

 N/A 0.625 pol.

L6

 N/A 1.500 pol.

DRC

 N/A 2.700 pol.

SS

 N/A 3/8 pol.

Weight with RSB hubs

 N/A 25 lb

Max RPM Balanced G2.5 Standard

 N/A 6000

Max RPM Unbalanced Standard

 N/A 12000

Insert Type Yellow

Continuous Standard - Yellow

 N/A 6000 lb·pol.

Intermittent Standard - Yellow

 N/A 9600 lb·pol.

HP at 100 RPM Standard - Yellow

 N/A 9.52 SF1

Temperature [Max] Standard - Yellow

 N/A 250 °F

Temperature [Min] Standard - Yellow

 N/A -60 °F

Insert Type Orange

Continuous - Orange

 N/A 9000 lb·pol.

Intermittent - Orange

 N/A 12600 lb·pol.

Temp Rating - Orange

 N/A -20/250 °F

Durometer - Orange

 N/A 70D

Insert Type Red

Continuous - Red

 N/A 5100 lb·pol.

Intermittent - Red

 N/A 8160 lb·pol.

Temp Rating - Red

 N/A 20/350 °F

Durometer - Red

 N/A 90A

Insert Type Green

Continuous - Green

 N/A 2700 lb·pol.

Intermittent - Green

 N/A 4500 lb·pol.

Temp Rating - Green

 N/A -60/250 °F

Durometer - Green

 N/A 90A