U.S. Tsubaki Power Transmission, LLC
U.S. Tsubaki Holdings, Inc.
Corporate Headquarters
301 E. Marquardt Dr.
Wheeling, IL 60090 USA

Toll Free: 800.323.7790
Phone: 847.459.9500
Fax: 847.459.9515
Email: sales@ustsubaki.com
Website: www.ustsubaki.com
Imprimir Traseiro
TFS Series Cam Clutch is a sprag type clutch designed for press fit installation. Sprag type designs typically have a higher torque capacity than a similarly sized ramp & roller type clutch. TFS has two vertical keyways on the outer race to assist with locating. Outside dimensions are the same as Series 63 ball bearings. This design is ideal for general inner or outer race overrunning applications. Since the TFS Series does not include an integral bearing, installing the TFS Cam Clutch next to a bearing which handles both the axial and radial loads is the typical application.
Unidade de medida

Especificações

Código UPC

 N/A 097039257734

Tamanho do orifício

 N/A 3.150 pol.80.00 mm

Capacidade de torque

 N/A 2894.2 lb·pé3924.0 N·m

Avanço máximo do anel interno

 N/A 670 rpm

Avanço máximo do anel externo

 N/A 340 rpm

Torque de arrasto

 N/A 0.900 lb·pé1.22 N·m

Rasgo de chaveta

 N/A 22 x 3,1 mm

A (Largura total)

 N/A 2.283 pol.58.00 mm

B (Diâmetro total)

 N/A 6.693 pol.170.00 mm

C (DI do anel externo)

 N/A 5.512 pol.140.00 mm

D (DI do anel interno)

 N/A 3.937 pol.100.00 mm

E (Chanfro)

 N/A 0.102 pol.2.60 mm

F (Chanfro)

 N/A 0.059 pol.1.50 mm

G (Largura da ranhura)

 N/A 0.787 pol.20.00 mm

H (Profundidade da ranhura)

 N/A 0.295 pol.0.30 mm

Peso

 N/A 14.168 lb6.440 kg