U.S. Tsubaki Power Transmission, LLC
U.S. Tsubaki Holdings, Inc.
Corporate Headquarters
301 E. Marquardt Dr.
Wheeling, IL 60090 USA

Toll Free: 800.323.7790
Phone: 847.459.9500
Fax: 847.459.9515
Email: sales@ustsubaki.com
Website: www.ustsubaki.com
Imprimir Traseiro
TFS Series Cam Clutch is a sprag type clutch designed for press fit installation. Sprag type designs typically have a higher torque capacity than a similarly sized ramp & roller type clutch. TFS has two vertical keyways on the outer race to assist with locating. Outside dimensions are the same as Series 63 ball bearings. This design is ideal for general inner or outer race overrunning applications. Since the TFS Series does not include an integral bearing, installing the TFS Cam Clutch next to a bearing which handles both the axial and radial loads is the typical application.
Unidade de medida

Especificações

Código UPC

 N/A 097039970763

Tamanho do orifício

 N/A 0.472 pol.12.00 mm

Capacidade de torque

 N/A 13.3 lb·pé18.0 N·m

Avanço máximo do anel interno

 N/A 4500 rpm

Avanço máximo do anel externo

 N/A 2300 rpm

Torque de arrasto

 N/A 0.030 lb·pé0.04 N·m

Rasgo de chaveta

 N/A 4 x 1,8 mm

A (Largura total)

 N/A 0.512 pol.13.00 mm

B (Diâmetro total)

 N/A 1.378 pol.35.00 mm

C (DI do anel externo)

 N/A 1.181 pol.30.00 mm

D (DI do anel interno)

 N/A 0.709 pol.18.00 mm

E (Chanfro)

 N/A 0.024 pol.0.60 mm

F (Chanfro)

 N/A 0.012 pol.0.30 mm

G (Largura da ranhura)

 N/A 0.157 pol.4.00 mm

H (Profundidade da ranhura)

 N/A 0.055 pol.0.06 mm

Peso

 N/A 0.150 lb0.068 kg