Call: 800.323.7790 | |  
  • Designed to fit small hub diameters
  • Tapered design allows for accurate shaft to hub alignement
  • Available in metric sizes from: 5mm - 100mm


  • For selection and application see Technical Notes download
    Unit of Measure

    Specifications

    d - Shaft O.D.

    N/A 0.433 in

    t1 - Shaft Dia. Tolerance

    N/A -0.0011 in +0

    D - Hub Counter I.D.

    N/A 0.709 in

    t2 - Hub Counter ID Tolerance

    N/A +0.0011 in -0

    l

    N/A 0.551 in

    L0

    N/A 0.906 in

    L1

    N/A 1.024 in

    Lt

    N/A 1.181 in

    D1

    N/A 1.260 in

    D2

    N/A 1.102 in

    Transmissible Torque

    N/A 35 ft·lb

    Transmissible Thrust

    N/A 1954 lb

    P - Contact Pressure - Shaft

    N/A 24222 psi

    P' - Contact Pressure - Hub Bore

    N/A 14794 psi

    Weight

    N/A 0.200 lb

    Locking Bolts

    Quantity

    N/A 4

    Size

    N/A M4x10

    Tightening Torque

    N/A 3.500 ft·lb

    Features & Application

    N/A

    • Same Inner and Outer Diameters as the EL Series
      Designed with the same inner and outer diameters as an EL Series POWER-LOCK.
    • Self-Centering
      These units provide accurate shaft-hub alignment and concentricity, allowing straight bore mounting.
    • Simple Construction
      Constructed with only an inner and an outer ring and locking bolts. Simply tighten these bolts to achieve a completely secure connection.

    To send your information to Tsubaki, press this button
    ^