Call: 800.323.7790 | |  
  • Most popular series world-wide
  • Easy machining of shaft and hub
  • Can use on shafts with a keyway
  • Metric size range: 19-mm thru 300-mm


For selection and application see Technical Notes download
Unit of Measure

Specifications

d - Shaft O.D.

N/A 0.787 in

t1 - Shaft Dia. Tolerance

N/A -0.0013 in +0

D - Hub Counter I.D.

N/A 1.850 in

t2 - Hub Counter ID Tolerance

N/A +0.0015 in -0

L

N/A 0.787 in

l

N/A 0.709 in

Lt

N/A 1.024 in

Transmissible Torque

N/A 196 ft·lb

Transmissible Thrust

N/A 5940 lb

P - Contact Pressure - Shaft

N/A 28863 psi

P' - Contact Pressure - Hub Bore

N/A 12328 psi

Weight

N/A 0.400 lb

Locking Bolts

Quantity

N/A 6

Size

N/A M6x18

Tightening Torque

N/A 12.500 ft·lb

Features & Application

N/A

  • Multipurpose
    Ideally structured and highly reliable locking device
  • Low Machining Costs
    Keyway, splines, presses and thermal fittings are not required. Optimum performance is achieved with low shaft and hub tolerances minimizing the total machining costs.
  • Easy to Install
    Install or removes just by tightening or loosening of bolts. No need to hassle with adjusting keyways and thermal fittings.
  • Options to Fit Every Application
    Stainless Steel and electroless nickle plating options are offered for standard models. Both are highly durable in corrosive or clean room environments.

To send your information to Tsubaki, press this button
^