Call: 800.323.7790 | |  
These chains provide a high quality conveying medium for material handling equipment, road building machinery, textile machinery, farming implements, baking, packaging, and bottling equipment.

Sprockets for RS and Double Pitch Roller Conveyor Chain.
There are special sprockets for RS and Double Pitch Roller Conveyor Chains. However, ANSI standard sprockets may be used if the roller is a standard small roller and the number of sprocket teeth is greater than 30. Contact us for details of special sprockets.

  • Attachments can be spaced as desired upon request. For even number of spacing, attachments will be fitted on pin link unless otherwise specified.
  • Spring clip type connecting links will be provided for CC2040 - CC2060H and CC2042 - CC2062H.
  • Dimensions O, O1 and G show actual hole diameter.

All dimensions are nominal values and for reference only
Unit of Measure

Specifications

P - Pitch

N/A 1.500 in

R - Roller Diameter

N/A 0.469 in

W - Width Between Roller Link Plates

N/A 0.500 in

Average Tensile Strength

N/A 9040 lb

Maximum Allowable Load

N/A 1410 lb

Number of Links per 10 ft

N/A 80

Standard Connection

N/A Spring Clip Type

Chain Type

N/A Standard Roller

Sidebar Type

N/A Heavy Side Plates

Approx. Weight

N/A 1.010 lb/ft

Pin Specifications

D

N/A 0.234 in

L1

N/A 0.573 in

L2

N/A 0.652 in

Link Plate

T

N/A 0.125 in

H

N/A 0.677 in
To send your information to Tsubaki, press this button
^