Learn How Tsubaki is supporting Meat & Poultry Companies.
Call: 800.323.7790 | |  
Learn how Tsubaki is supporting Meat & Poultry Companies.

During the COVID-19 pandemic, U.S. Tsubaki is offering virtual plant visits & meetings to help with your operational issues. Click here to request virtual assistance.

U.S. Tsubaki keeps the beverages flowing at breweries, soft drink bottlers, and juice manufacturers throughout the world. We make chain that is used in bottlewashers, pasteurizers, and sterilizers. There are hundreds of specifications and configurations that can be used in these applica tions, depending on the type and capacity of equipment, size of bottles, and many other factors. We have a wide range of chains available, or we can make a chain to your exact specifications.
Unit of Measure



N/A 4.000 in

G - Pin Diameter

N/A 0.560 in

D - Roller Diameter

N/A 2.500 in

A - Overall Length

N/A 2.630 in

E - Inside Width

N/A 0.940 in

H - Sidebar Height

N/A 1.500 in

T - Sidebar Thickness

N/A 0.310 in

B - Pin Head to CL Chain Width

N/A 1.120 in

C - Pin End to CL Chain Width

N/A 1.510 in

Bearing Area (Nominal)

N/A 0.690 in²

Average Ultimate Strength

N/A 50000 lb

Max. Work Load

N/A 3075 lb

Approx. Weight

N/A 7.800 lb/ft

Attachment Specifications


N/A 2.000 in


N/A 0.380 in

Make In-Line Inspections Easy

N/A Put machinery access at your fingertips. ONE-TOUCH INSPECTION DOOR® is a dust- and rain-tight inspection and service door for conveyors, as well as processing and handling equipment. These pre-fabricated units are in-stock and ready-to-go for easy installation at the job site. Once in place, ONE-TOUCH INSPECTION DOOR allows for quick and simple inspection without the need for special tools: just lift the lever! No bolts to loosen and no covers to misplace. One touch is all it takes...it's that simple. For more information, see the ONE-TOUCH INSPECTION DOOR description in Section C.

Factors to Consider

N/A Bottlewasher/Pasteurizer Chains are used to convey large quantities of bottles at a slow speed through the washer or pasteurizer. Chains are generally matched and tagged to hold bottle racks in exact position between chains without skewing. Chain and attachment tolerances are very important. Usually the chains are constructed of carbon steel for increased economy. Since the environment is wet, stainless steel or plated parts can be used to improve corrosion resistance. Chains can be almost any pitch size; however, they are commonly in the 4" to 6" range. Attachments are usually mid-pitch holes or A styles, but may be made to fit your units. Sterilizers use two strands of chain. Bottles are sterilized by steam, which creates a wet, high-temperature environment (> 200°F). That means chains must be constructed from tem perature- and corrosion-resistant materials, such as stainless steel. Sterilizer chains frequently have a 4" to 6" pitch.

To send your information to Tsubaki, press this button