Call: 800.323.7790 | |  
BR-HT is mainly used in backstop applications as an integral part of a gear reducer. Prevention of reverse rotation for inclined conveyor and bucket elevator are typical application BR-HT assures not only the immediate backstop function under high torque, but also long service life by the “lift-off” design. In addition, installation on the high speed shaft with low torque enables selection of more compact models with resulting lower cost.
Unit of Measure


Torque Capacity

N/A 143824.2 lb·ft195000.0 N·m

Min. Inner Race Overrunning Speed

N/A 165 rpm

Max. Inner Race Overrunning Speed

N/A 1000 rpm

Max. Engagement

N/A 85 rpm

Bore Size

N/A 12.598 in320.00 mm

A (Inner Race Width)

N/A 4.921 in125.00 mm

B (Outer Race Width)

N/A 4.724 in120.00 mm

C (Outer Race O.D.)

N/A 24.803 in630.00 mm

D (Outer Race I.D.)

N/A 18.898 in480.00 mm

E (Inner Race O.D.)

N/A 16.260 in413.00 mm

G (Bolt Circle Diameter)

N/A 22.047 in560.00 mm

Q-R (Mounting Holes Quantity - Size)

N/A 24-M24

S-T (Removed Holes Quantity - Size)

N/A 2-M24

F (Cam Width)

N/A 3.937 in100.00 mm


N/A 409.200 lb186.000 kg

H (Housing Bore Min.)

N/A 18.110 in460.00 mm

M (Counter Bore Depth Max.)

N/A 0.315 in8.00 mm

N (Chamfer)

N/A 0.118 in3.00 mm
To send your information to Tsubaki, press this button