Call: 800.323.7790 | |  
BR-HT is mainly used in backstop applications as an integral part of a gear reducer. Prevention of reverse rotation for inclined conveyor and bucket elevator are typical application BR-HT assures not only the immediate backstop function under high torque, but also long service life by the “lift-off” design. In addition, installation on the high speed shaft with low torque enables selection of more compact models with resulting lower cost.
Unit of Measure

Specifications

Torque Capacity

N/A 221268.0 lb·ft300000.0 N·m

Min. Inner Race Overrunning Speed

N/A 170 rpm

Max. Inner Race Overrunning Speed

N/A 1000 rpm

Max. Engagement

N/A 90 rpm

Bore Size

N/A 11.024 in280.00 mm

A (Inner Race Width)

N/A 9.843 in250.00 mm

B (Outer Race Width)

N/A 9.843 in250.00 mm

C (Outer Race O.D.)

N/A 22.835 in580.00 mm

D (Outer Race I.D.)

N/A 16.929 in430.00 mm

E (Inner Race O.D.)

N/A 14.291 in363.00 mm

G (Bolt Circle Diameter)

N/A 19.685 in500.00 mm

Q-R (Mounting Holes Quantity - Size)

N/A 24-M30

S-T (Removed Holes Quantity - Size)

N/A 2-M30

F (Cam Width)

N/A 7.874 in200.00 mm

Weight

N/A 684.200 lb311.000 kg

H (Housing Bore Min.)

N/A 15.748 in400.00 mm

M (Counter Bore Depth Max.)

N/A 0.906 in23.00 mm

N (Chamfer)

N/A 0.118 in3.00 mm
To send your information to Tsubaki, press this button
^