Item # T0-HD, T-Series Non-Spacer Couplings On U.S. Tsubaki Inc.

The T-Series uniquely transmits torque while accommodating misalignment without generating reactionary loads, increasing bearing life. Torque transmission capabilities up to 2,041,000 in.-lbs and shaft diameters to 20.00”. Coupling types range from close coupled to long span floating shaft couplings. The bolt on ring makes the T-Series a great fit for bidirectional and reversing applications. The T- Series has no metal-to-metal contact and in the event of a lock up, the insert will shear without damaging the connected equipment. Lubrication free and access to the insert without moving the connected equipment means replacing inserts with ease in minutes vs hours compared to lubricated coupling maintenance.

T-Series absorbs extreme torsional shock and vibration while accommodating angular, parallel, and axial misalignment without generating reactionary loads, which significantly increases bearing life.
No lubrication is required.
Standard inserts have a temperature range from -60° to 250° Fahrenheit with high temperature inserts available up to 350°.
The inserts are available in a range of hardness to meet most torsional stiffness and torque requirements, and offers very high resistance to chemicals.
T-Series couplings are suitable for blind assembly, horizontal or vertical, reversing, and stop/start applications.
The compact size to torque ratio with generous bore capacity allows proper sizing.
Hubs are available for use with tapered bushings, Iock assemblies, shrink discs, finished bored and keyed, taper bored, and spline bored.
OnyxShield™ couplings are available for enhanced corrosion and wear resistance.

Unit of Measure

Specifications | Insert Type Yellow HD | Insert Type Orange HD | Insert Type Red HD | Insert Type Green HD

Specifications

G	N/A 2.850 in
D1	N/A 2.950 in
MBFH	N/A 1.375 in
MBRH	N/A 1.625 in
MBHD	N/A 1.875 in
RSB	N/A 0.300 in
E	N/A 0.100 in
D2	N/A 1.995 in
D3	N/A 2.050 in
D4	N/A 2.470 in
HD	N/A 2.850 in
L1	N/A 1.375 in
L2	N/A 1.375 in
L3	N/A 0.650 in
L4	N/A 0.980 in
L5	N/A 0.375 in
L6	N/A 0.885 in
DRC	N/A 1.500 in
SS	N/A 5/16 in
Weight with RSB hubs	N/A 5 lb
Max RPM Balanced G2.5 Standard	N/A 12000
Max RPM Unbalanced Standard	N/A 18000

Insert Type Yellow HD

Continuous Standard HD	N/A 1300 lb·in
Intermittent Standard HD	N/A 2340 lb·in
HP at 100 RPM Standard HD	N/A 2.06 SF1
Temperature [Max] Standard HD	N/A 250 ºF
Temperature [Min] Standard HD	N/A -60 ºF
Durometer Standard HD	N/A 60D

Insert Type Orange HD

Continuous - Orange HD	N/A 1469 lb·in
Intermittent - Orange HD	N/A 2938 lb·in
Temp Rating - Orange HD	N/A -20/250 ºF
Durometer - Orange HD	N/A 70D

Insert Type Red HD

Continuous - Red HD	N/A 1105 lb·in
Intermittent - Red HD	N/A 1989 lb·in
Temp Rating - Red HD	N/A 20/350 ºF
Durometer - Red HD	N/A 90A

Insert Type Green HD

Continuous - Green HD	N/A 537 lb·in
Intermittent - Green HD	N/A 966 lb·in
Temp Rating - Green HD	N/A -60/250 ºF
Durometer - Green HD	N/A 90A

Specifications

G

D1

MBFH

MBRH

MBHD

RSB

E

D2

D3

D4

HD

L1

L2

L3

L4

L5

L6

DRC

SS

Weight with RSB hubs

Max RPM Balanced G2.5 Standard

Max RPM Unbalanced Standard

Insert Type Yellow HD

Continuous Standard HD

Intermittent Standard HD

HP at 100 RPM Standard HD

Temperature [Max] Standard HD

Temperature [Min] Standard HD

Durometer Standard HD

Insert Type Orange HD

Continuous - Orange HD

Intermittent - Orange HD

Temp Rating - Orange HD

Durometer - Orange HD

Insert Type Red HD

Continuous - Red HD

Intermittent - Red HD

Temp Rating - Red HD

Durometer - Red HD

Insert Type Green HD

Continuous - Green HD

Intermittent - Green HD

Temp Rating - Green HD

Durometer - Green HD