N.º de artículo T9, T-Series Non-Spacer Couplings En U.S. Tsubaki Inc.

The T-Series uniquely transmits torque while accommodating misalignment without generating reactionary loads, increasing bearing life. Torque transmission capabilities up to 2,041,000 in.-lbs and shaft diameters to 20.00”. Coupling types range from close coupled to long span floating shaft couplings. The bolt on ring makes the T-Series a great fit for bidirectional and reversing applications. The T- Series has no metal-to-metal contact and in the event of a lock up, the insert will shear without damaging the connected equipment. Lubrication free and access to the insert without moving the connected equipment means replacing inserts with ease in minutes vs hours compared to lubricated coupling maintenance.

T-Series absorbs extreme torsional shock and vibration while accommodating angular, parallel, and axial misalignment without generating reactionary loads, which significantly increases bearing life.
No lubrication is required.
Standard inserts have a temperature range from -60° to 250° Fahrenheit with high temperature inserts available up to 350°.
The inserts are available in a range of hardness to meet most torsional stiffness and torque requirements, and offers very high resistance to chemicals.
T-Series couplings are suitable for blind assembly, horizontal or vertical, reversing, and stop/start applications.
The compact size to torque ratio with generous bore capacity allows proper sizing.
Hubs are available for use with tapered bushings, Iock assemblies, shrink discs, finished bored and keyed, taper bored, and spline bored.
OnyxShield™ couplings are available for enhanced corrosion and wear resistance.

Unidad de medida

Especificaciones | Insert Type Yellow | Insert Type Orange | Insert Type Red | Insert Type Green

Especificaciones

G	N/D 16.200 in
D1	N/D 18.020 in
MBFH	N/D 9.000 in
MBRH	N/D 10.375 in
MBHD	N/D 13.250 in
RSB	N/D 2.900 in
E	N/D 0.200 in
D2	N/D 12.775 in
D3	N/D 13.780 in
D4	N/D 13.875 in
HD	N/D 17.670 in
L1	N/D 8.000 in
L2	N/D 8.000 in
L3	N/D 3.875 in
L4	N/D 6.440 in
L5	N/D 1.500 in
L6	N/D 4.385 in
DRC	N/D 8.010 in
SS	N/D 1-8 in
Weight with RSB hubs	N/D 600 lb
Max RPM Balanced G2.5 Standard	N/D 1450
Max RPM Unbalanced Standard	N/D 2100

Insert Type Yellow

Continuous Standard - Yellow	N/D 304000 lb·in
Intermittent Standard - Yellow	N/D 500000 lb·in
HP at 100 RPM Standard - Yellow	N/D 482 SF1
Temperature [Max] Standard - Yellow	N/D 250 ºF
Temperature [Min] Standard - Yellow	N/D -60 ºF

Insert Type Orange

Continuous - Orange	N/D 452000 lb·in
Intermittent - Orange	N/D 603000 lb·in
Temp Rating - Orange	N/D -20/250 ºF
Durometer - Orange	N/D 70D

Insert Type Red

Continuous - Red	N/D 258400 lb·in
Intermittent - Red	N/D 425000 lb·in
Temp Rating - Red	N/D 20/350 ºF
Durometer - Red	N/D 90A

Insert Type Green

Continuous - Green	N/D 125250 lb·in
Intermittent - Green	N/D 206250 lb·in
Temp Rating - Green	N/D -60/250 ºF
Durometer - Green	N/D 90A

Especificaciones

G

D1

MBFH

MBRH

MBHD

RSB

E

D2

D3

D4

HD

L1

L2

L3

L4

L5

L6

DRC

SS

Weight with RSB hubs

Max RPM Balanced G2.5 Standard

Max RPM Unbalanced Standard

Insert Type Yellow

Continuous Standard - Yellow

Intermittent Standard - Yellow

HP at 100 RPM Standard - Yellow

Temperature [Max] Standard - Yellow

Temperature [Min] Standard - Yellow

Insert Type Orange

Continuous - Orange

Intermittent - Orange

Temp Rating - Orange

Durometer - Orange

Insert Type Red

Continuous - Red

Intermittent - Red

Temp Rating - Red

Durometer - Red

Insert Type Green

Continuous - Green

Intermittent - Green

Temp Rating - Green

Durometer - Green