N.º de artículo T10-HD, T-Series Non-Spacer Couplings En U.S. Tsubaki Inc.

The T-Series uniquely transmits torque while accommodating misalignment without generating reactionary loads, increasing bearing life. Torque transmission capabilities up to 2,041,000 in.-lbs and shaft diameters to 20.00”. Coupling types range from close coupled to long span floating shaft couplings. The bolt on ring makes the T-Series a great fit for bidirectional and reversing applications. The T- Series has no metal-to-metal contact and in the event of a lock up, the insert will shear without damaging the connected equipment. Lubrication free and access to the insert without moving the connected equipment means replacing inserts with ease in minutes vs hours compared to lubricated coupling maintenance.

T-Series absorbs extreme torsional shock and vibration while accommodating angular, parallel, and axial misalignment without generating reactionary loads, which significantly increases bearing life.
No lubrication is required.
Standard inserts have a temperature range from -60° to 250° Fahrenheit with high temperature inserts available up to 350°.
The inserts are available in a range of hardness to meet most torsional stiffness and torque requirements, and offers very high resistance to chemicals.
T-Series couplings are suitable for blind assembly, horizontal or vertical, reversing, and stop/start applications.
The compact size to torque ratio with generous bore capacity allows proper sizing.
Hubs are available for use with tapered bushings, Iock assemblies, shrink discs, finished bored and keyed, taper bored, and spline bored.
OnyxShield™ couplings are available for enhanced corrosion and wear resistance.

Unidad de medida

Especificaciones | Insert Type Yellow HD | Insert Type Orange HD | Insert Type Red HD | Insert Type Green HD

Especificaciones

G	N/D 18.200 in
D1	N/D 19.950 in
MBFH	N/D 10.000 in
MBRH	N/D 12.000 in
MBHD	N/D 15.375 in
RSB	N/D 3.700 in
E	N/D 0.200 in
D2	N/D 14.625 in
D3	N/D 15.710 in
D4	N/D 16.500 in
HD	N/D 19.700 in
L1	N/D 9.000 in
L2	N/D 9.000 in
L3	N/D 4.140 in
L4	N/D 6.875 in
L5	N/D 2.000 in
L6	N/D 5.185 in
DRC	N/D 9.570 in
SS	N/D 1-8 in
Weight with RSB hubs	N/D 950 lb
Max RPM Balanced G2.5 Standard	N/D 1300
Max RPM Unbalanced Standard	N/D 1750

Insert Type Yellow HD

Continuous Standard HD	N/D 702000 lb·in
Intermittent Standard HD	N/D 1118000 lb·in
HP at 100 RPM Standard HD	N/D 1114 SF1
Temperature [Max] Standard HD	N/D 250 ºF
Temperature [Min] Standard HD	N/D -60 ºF
Durometer Standard HD	N/D 60D

Insert Type Orange HD

Continuous - Orange HD	N/D 1157000 lb·in
Intermittent - Orange HD	N/D 1820000 lb·in
Temp Rating - Orange HD	N/D -20/250 ºF
Durometer - Orange HD	N/D 70D

Insert Type Red HD

Continuous - Red HD	N/D 596700 lb·in
Intermittent - Red HD	N/D 950300 lb·in
Temp Rating - Red HD	N/D 20/350 ºF
Durometer - Red HD	N/D 90A

Insert Type Green HD

Continuous - Green HD	N/D 263250 lb·in
Intermittent - Green HD	N/D 419250 lb·in
Temp Rating - Green HD	N/D -60/250 ºF
Durometer - Green HD	N/D 90A

Especificaciones

G

D1

MBFH

MBRH

MBHD

RSB

E

D2

D3

D4

HD

L1

L2

L3

L4

L5

L6

DRC

SS

Weight with RSB hubs

Max RPM Balanced G2.5 Standard

Max RPM Unbalanced Standard

Insert Type Yellow HD

Continuous Standard HD

Intermittent Standard HD

HP at 100 RPM Standard HD

Temperature [Max] Standard HD

Temperature [Min] Standard HD

Durometer Standard HD

Insert Type Orange HD

Continuous - Orange HD

Intermittent - Orange HD

Temp Rating - Orange HD

Durometer - Orange HD

Insert Type Red HD

Continuous - Red HD

Intermittent - Red HD

Temp Rating - Red HD

Durometer - Red HD

Insert Type Green HD

Continuous - Green HD

Intermittent - Green HD

Temp Rating - Green HD

Durometer - Green HD