U.S. Tsubaki Power Transmission, LLC
U.S. Tsubaki Holdings, Inc.
Corporate Headquarters
301 E. Marquardt Dr.
Wheeling, IL 60090 USA

Toll Free: 800.323.7790
Phone: 847.459.9500
Fax: 847.459.9515
Email: sales@ustsubaki.com
Website: www.ustsubaki.com
Print Back
Construction and Features
Pitch 7.090 in

TK Cableveyor is constructed of steel chain with aluminum supporters to give high strength and durability for diverse applications. The holes of the supporters are made to fit the cables or hoses precisely. These cableveyors are very versatile and can fit most industrial machines.
Unit of Measure

Specifications

Minimum distance of ends

 N/A 0.710

Minimum distance of cables

 N/A 0.160

Pitch

 N/A 7.090 in

R - Bending Radius

 N/A 15.750 in

Cabel/Hose Maximum Outer Diameter

 N/A 15.750 in

A - Dimension

 N/A 4.330 in

B - Dimension

 N/A 15.750 in

U - Dimension

 N/A 0.790 in

TK Type Oval Cableveyor

N/A

  • TK type Cableveyor has been designed to protect workers from accidents by utilizing specially shaped link plates. This link plate design has solved the problems that may occur due to crevices between link plates.
  • All link plates are offset type. The pins at the moving connection are through hardened by an induction heat-treatment to provide high abrasion and deformation resistance. TK type Cableveyor is also effective against side force damage.
  • Proper size holes will be made to your specifications. The holes on the stays are made to fit the diameter of the cables or hoses.
  • By using the correct size holes in the stays, cables and hoses will be very steady and well protected.

Supporters

N/A There are two types of supporters for TK type Cableveyor, a one-piece supporter and a split supporter. The split supporter is very convenient for long moving strokes, if an odd-shaped attachment is used on the cables or hoses, or if a large number of cables or hoses must be installed.