LAMBDA for accumulating conveyors.
  • Lube-free with a low center of gravity
  • Long wear life
  • Operates in temperatures up to 176°F (due to plastic components)


Note: For staggered outboard roller installation, the plastic brake rollers are spaced every third link alternating from right to left. For crosswise outboard roller installation, they are spaced in pairs every sixth link. These configurations are standard.
1 - 12 of 12 | Results Per Page | View | Unit of Measure
1 

Item #

ANSI No.

P - Pitch

R - Roller Diameter

W - Width Between Roller Link Plates

Approx. Weight

Spacing

Outboard Roller Installation

N/A 40 N/A 0.500 in N/A 0.312 in N/A 0.312 in N/A 0.630 lbs/ft N/A At Every Link N/A Staggered
N/A 40 N/A 0.500 in N/A 0.312 in N/A 0.312 in N/A 0.630 lbs/ft N/A At Every Link N/A Staggered
N/A 50 N/A 0.625 in N/A 0.400 in N/A 0.375 in N/A 0.950 lbs/ft N/A At Every Link N/A Staggered
N/A 50 N/A 0.625 in N/A 0.400 in N/A 0.375 in N/A 0.950 lbs/ft N/A At Every Link N/A Staggered
N/A 60 N/A 0.750 in N/A 0.469 in N/A 0.500 in N/A 1.420 lbs/ft N/A At Every Link N/A Staggered
N/A 60 N/A 0.750 in N/A 0.469 in N/A 0.500 in N/A 1.420 lbs/ft N/A At Every Link N/A Staggered
N/A 40 N/A 0.500 in N/A 0.312 in N/A 0.312 in N/A 0.630 lbs/ft N/A At Every 2nd Link N/A Crosswise
N/A 40 N/A 0.500 in N/A 0.312 in N/A 0.312 in N/A 0.630 lbs/ft N/A At Every 2nd Link N/A Crosswise
N/A 50 N/A 0.625 in N/A 0.400 in N/A 0.375 in N/A 0.950 lbs/ft N/A At Every 2nd Link N/A Crosswise
N/A 50 N/A 0.625 in N/A 0.400 in N/A 0.375 in N/A 0.950 lbs/ft N/A At Every 2nd Link N/A Crosswise
N/A 60 N/A 0.750 in N/A 0.469 in N/A 0.500 in N/A 1.420 lbs/ft N/A At Every 2nd Link N/A Crosswise
N/A 60 N/A 0.750 in N/A 0.469 in N/A 0.500 in N/A 1.420 lbs/ft N/A At Every 2nd Link N/A Crosswise
1 - 12 of 12 | Results Per Page | View | Unit of Measure
1