Super-H Series
Super-H Series Chain has the same wide waist as Super Series. The link plate thickness is identical to those of the ASME/ANSI Heavy Series roller chains. The same special manufacturing techniques used in Super Series Chain are used to produce the pitch holes. The pins are thru hardened. Because of this, Super-H Series Chain has an even higher Maximum Allowable Load than the Super Series.
1 - 25 of 42 | Results Per Page | View | Unit of Measure
1 2 

Item #

ANSI No.

Standard Type of Pin

Strand

P - Pitch

R - Roller Diameter

W - Width Between Roller Link Plates

N/A 80 N/A Riveted N/A Single N/A 1.000 in N/A 0.625 in N/A 0.625 in
N/A 80 N/A Cottered N/A Single N/A 1.000 in N/A 0.625 in N/A 0.625 in
N/A 100 N/A Riveted N/A Single N/A 1.250 in N/A 0.750 in N/A 0.750 in
N/A 100 N/A Cottered N/A Single N/A 1.250 in N/A 0.750 in N/A 0.750 in
N/A 120 N/A Riveted N/A Single N/A 1.500 in N/A 0.875 in N/A 1.000 in
N/A 120 N/A Cottered N/A Single N/A 1.500 in N/A 0.875 in N/A 1.000 in
N/A 140 N/A Riveted N/A Single N/A 1.750 in N/A 1.000 in N/A 1.000 in
N/A 140 N/A Cottered N/A Single N/A 1.750 in N/A 1.000 in N/A 1.000 in
N/A 160 N/A Riveted N/A Single N/A 2.000 in N/A 1.125 in N/A 1.250 in
N/A 160 N/A Cottered N/A Single N/A 2.000 in N/A 1.125 in N/A 1.250 in
N/A 200 N/A Riveted N/A Single N/A 2.500 in N/A 1.562 in N/A 1.500 in
N/A 200 N/A Cottered N/A Single N/A 2.500 in N/A 1.562 in N/A 1.500 in
N/A 240 N/A Riveted N/A Single N/A 3.000 in N/A 1.875 in N/A 1.875 in
N/A 240 N/A Cottered N/A Single N/A 3.000 in N/A 1.875 in N/A 1.875 in
N/A 80 N/A Riveted N/A Double N/A 1.000 in N/A 0.625 in N/A 0.625 in
N/A 80 N/A Cottered N/A Double N/A 1.000 in N/A 0.625 in N/A 0.625 in
N/A 100 N/A Riveted N/A Double N/A 1.250 in N/A 0.750 in N/A 0.750 in
N/A 100 N/A Cottered N/A Double N/A 1.250 in N/A 0.750 in N/A 0.750 in
N/A 120 N/A Riveted N/A Double N/A 1.500 in N/A 0.875 in N/A 1.000 in
N/A 120 N/A Cottered N/A Double N/A 1.500 in N/A 0.875 in N/A 1.000 in
N/A 140 N/A Riveted N/A Double N/A 1.750 in N/A 1.000 in N/A 1.000 in
N/A 140 N/A Cottered N/A Double N/A 1.750 in N/A 1.000 in N/A 1.000 in
N/A 160 N/A Riveted N/A Double N/A 2.000 in N/A 1.125 in N/A 1.250 in
N/A 160 N/A Cottered N/A Double N/A 2.000 in N/A 1.125 in N/A 1.250 in
N/A 200 N/A Riveted N/A Double N/A 2.500 in N/A 1.562 in N/A 1.500 in
1 - 25 of 42 | Results Per Page | View | Unit of Measure
1 2