function googleTranslateElementInit() { new google.translate.TranslateElement({pageLanguage: 'en', layout: google.translate.TranslateElement.InlineLayout.SIMPLE}, 'google_translate_element'); }
Call: 800.323.7790 | |  
U.S. Tsubaki TO Crescent Plate chain is used to convey containers and materials in the bottling and canning industries. It is especially useful when the length of the conveyor must be long and the load factor high.
  • Stronger than TS Top Plate chain.
  • Can follow any horizontal route.
  • The use of multiple drives makes long conveyor lengths possible.
  • A turn-table and guide roller are unnecessary on the return side.
  • Standard carbon steel chain with 430 stainless steel crescent shaped top plates are provided unless otherwise specified.
  • Min. radius of TO Crescent Plate chain is 4 inches.

TOS
Top plates are made of 430 stainless steel.
Chain is carbon steel.

TOR
Top plates are made of 430 stainless steel.
Chain is carbon steel.

Consult us for sprocket selection.
1 - 6 of 6 | Results Per Page | View | Unit of Measure
1 

Item #

Slat Width XW

S

Approx. Weight

Roller Diameter

TOS826 N/A 3.250 in N/A 0.705 in N/A 2.800 lb/ft N/A 0.625 in
TOS1143 N/A 4.500 in N/A 0.705 in N/A 3.200 lb/ft N/A 0.625 in
TOS1778 N/A 7.000 in N/A 0.831 in N/A 4.200 lb/ft N/A 0.625 in
TOR826 N/A 3.250 in N/A 0.705 in N/A 4.000 lb/ft N/A 1.750 in
TOR1143 N/A 4.500 in N/A 0.705 in N/A 4.600 lb/ft N/A 1.750 in
TOR1778 N/A 7.000 in N/A 0.831 in N/A 5.400 lb/ft N/A 1.750 in
1 - 6 of 6 | Results Per Page | View | Unit of Measure
1 
^