Crossrod conveyor chain consists of two parallel strands of standard RS40 or RS50 chains, joined by crossrods on every link. RS40 chain is used for light loads such as conveying bread through coolers, wrappers and slicers. RS50 chain is for heavier loads. When sanitary, noncorrosive qualities are required, crossrods can be stainless steel.
The connecting pins have milled flats and fit into a D-shaped hole in the link plate to prevent pin rotation and give longer life. Chains are furnished in five-foot sections and run on standard ASME/ANSI sprockets. Removable two-pitch link sections are available for repair.
1 - 6 of 6 | Results Per Page | View | Unit of Measure
1 

Item #

Pitch

Nominal Width

A - Plate to Plate Width

B - Overall Riveted

C - From Pin Head to End

D - Roller C.L. to C.L.

Average Weight

N/A 0.625 in N/A 12.000 in N/A 11.100 in N/A 12.600 in N/A 12.670 in N/A 11.812 in N/A 2.200 lbs/ft
N/A 0.625 in N/A 15.000 in N/A 14.100 in N/A 15.600 in N/A 15.670 in N/A 14.812 in N/A 2.800 lbs/ft
N/A 0.625 in N/A 18.000 in N/A 17.100 in N/A 18.600 in N/A 18.670 in N/A 17.812 in N/A 3.30 lbs/ft
N/A 0.625 in N/A 21.000 in N/A 20.100 in N/A 21.600 in N/A 21.670 in N/A 20.812 in N/A 3.60 lbs/ft
N/A 0.625 in N/A 24.000 in N/A 23.100 in N/A 24.600 in N/A 24.670 in N/A 23.812 in N/A 4.10 lbs/ft
N/A 0.625 in N/A 30.000 in N/A 29.100 in N/A 30.600 in N/A 30.670 in N/A 29.812 in N/A 4.900 lbs/ft
1 - 6 of 6 | Results Per Page | View | Unit of Measure
1