To send your information to Tsubaki, press this button
These chains provide a high quality conveying medium for material handling equipment, road building machinery, textile machinery, farming implements, baking, packaging, and bottling equipment.

Sprockets for RS and Double Pitch Roller Conveyor Chain.
There are special sprockets for RS and Double Pitch Roller Conveyor Chains. However, ANSI standard sprockets may be used if the roller is a standard small roller and the number of sprocket teeth is greater than 30. Contact us for details of special sprockets.

  • Attachments can be spaced as desired upon request. For even number of spacing, attachments will be fitted on pin link unless otherwise specified.
  • Spring clip type connecting links will be provided for C2040 - C2060H and C2042 - C2062H.
  • Dimensions O, O1 and G show actual hole diameter.

All dimensions are nominal values and for reference only
Unit of Measure

Specifications

P - Pitch

N/A 2.500 in

R - Roller Diameter

N/A 0.750 in

W - Width Between Roller Link Plates

N/A 0.750 in

Average Tensile Strength

N/A 24300 lb

Maximum Allowable Load

N/A 3840 lb

Number of Links per 10 ft

N/A 48

Chain Type

N/A Standard Roller

Sidebar Type

N/A Heavy Side Plates

Pin Specifications

D

N/A 0.375 in

L1

N/A 0.858 in

L2

N/A 0.965 in

Link Plate

T

N/A 0.187 in

H

N/A 1.126 in