function googleTranslateElementInit() { new google.translate.TranslateElement({pageLanguage: 'en', layout: google.translate.TranslateElement.InlineLayout.SIMPLE}, 'google_translate_element'); }
Call: 800.323.7790 | |  
  • ATC Chain HP-T Type

    ATC CHAIN HP-T TYPE WITH TOOL HOLDER
    HP-T type ATC chain is based on the HP type with steel tool holder. The inner diameter of the pin is tapered and a retaining function is installed on the pin.
    Economical: Additional installation of the tool holder is not necessary.
    Accurate holding: As the tool holder is combined with the chain, backlash is reduced.
    Compactness: Pin outer diameter and link plate width are smaller than those of HP type.
    1) U.S. Tsubaki standardized ATC chain is designed with pull stud, key, number plate and plastic sleeve. An engineering plastic sleeve is fitted to prevent contact with the metal taper parts and protect the shank from being scratched.
    2) Attachment chains other than the listed ATC chain line-up are also available to satisfy your special requirements.

  • ATC Chain HP-T Type

    The HP-T series is the hollow pin type chain complete with tool holder. Since the chain can bend backward, freedom of layout is exceptional, and a large number of tools can be held in a small space. Tools are held on the pitch line of the chain providing extra stability.
    Hollow pin type chain is also available upon request, and can be supplied with plastic pots.

    Hollow pin type chain is available upon request, and can be supplied fitted with plastic pots.
    Note: The dimension of HP type is different from HP-T type chain. Shanks No. 45 and 60 are also available upon request.

  • ATC Chain SK Type

    The stay pin series (SK02, SK04) resists lateral loads on the chain, and the side roller series (SK03, SK04) prevents tools from tilting and facilitates their positioning. The chain can be supplied fitted with plastic pots.

    SK Type Tool Holder chain utilizes roller chain components and specially configured side plates.
    SK Type ATC chain works with standard sprockets.
    Shanks No. 45 and 60 are available upon request.

  • ATC Chain SK-W Type

    The SK-W series is a wider version of the SK type, and is suitable for long and heavy tools. The chain can be supplied with plastic pots.

    SK-W type ATC chain is a wider version of the SK type and is designed for heavier and longer tools.
    The added width provides increased stability.
    Shanks No. 45 and 60 are available upon request. Consult us.

^